The post ABB 4-pole M mini contactors appeared first on Adex.
]]>
- High performances even when installed side by side
- Wide set of coils available
- Up to 6 auxiliary contacts can be mounted
- Fast operation
Main features
- Up to 5,5 kW – 400 V AC-3, 7,5 hp – 480V, 20 A – 400 V AC-1 and 20 A (600 V AC) – general use
- 2 terminal types available: screw terminal, specific screw terminals for ring tongue ferrules
- Standard DC versions with extended operating limits coils
- Complete range of accessories including front or side mounting auxiliary contact blocks, surge suppressors, and electronic timers
The post ABB 4-pole M mini contactors appeared first on Adex.
]]>The post ABB AF 3-pole contactors appeared first on Adex.
]]>- Optimize logistics and cut administration costs with fewer product variants to handle
- Access global support and use the same products in all parts of the world: the 100 … 250 V AC/DC coil covers all standard network voltages
- Push-in Spring terminals offer only one push for extremely fast wiring: faster than ever installation, easier than ever wiring, reliable as ever connections
- A reduction of the coil’s energy consumption by 80% lets you save energy
- Secure your uptime by letting the AF technology overbridge voltage drops and sags.
Main features
- Up to 560 kW – 400 V AC-3, 900 hp – 480 V and 2850 A – 690 V AC-1, 2850 A – general use
- Only 4 coils cover 24 V – 500 V AC and 20 V – 500 V DC
- Dedicated 24 V DC coil for direct control by PLC-output > 250 mA, low holding consumption up to 1.7 W.
- Screw, Push-in Spring and ring tongue connection types
- Built-in surge suppression
- Connection sets and interlock unit for reversing and star-delta starter for an easy, fast and secure assembly of starters
- Mirror and mechanically linked contacts.
The post ABB AF 3-pole contactors appeared first on Adex.
]]>The post EATON DILM/DILH power contactors appeared first on Adex.
]]>There are various types of contactors, and each type will have its own set of specifications depending on your application. Some key specifications are
- AC Contactor or DC Contactor with coils including 12 V, 24 V, 48 V, 110 V, 240 V, 400 V, and 440 V.
- Reversing or non-reversing functionality.
- AC3 and AC1 categories
- Contactors with 2 poles, 3 poles 4 poles, and even 8 and 10 pole variants.
- Various contact configurations.
- IEC standards
The post EATON DILM/DILH power contactors appeared first on Adex.
]]>The post EATON DILM/DILH power contactors appeared first on Adex.
]]>There are various types of contactors, and each type will have its own set of specifications depending on your application. Some key specifications are
- AC Contactor or DC Contactor with coils including 12 V, 24 V, 48 V, 110 V, 240 V, 400 V, and 440 V.
- Reversing or non-reversing functionality.
- AC3 and AC1 categories
- Contactors with 2 poles, 3 poles 4 poles, and even 8 and 10 pole variants.
- Various contact configurations.
- IEC standards
The post EATON DILM/DILH power contactors appeared first on Adex.
]]>The post ABB Contactors for capacitor switching appeared first on Adex.
]]>
Product Features
- RA contactors, with damping resistors, are used when peak currents far exceed 100 times the nominal rms current
- UA contactors are used when peak currents are less or equal to 100 times the nominal rms current
- RA with wide control voltage range available, thanks to AF technology and electronic coil.
The post ABB Contactors for capacitor switching appeared first on Adex.
]]>The post ABB Contactors for DC switching appeared first on Adex.
]]>- Compact and modern design
- IEC and UL-approved
- Access global support and use the same products in all parts of the world
- Reliable in all networks.
Product Features
- Up to 1050 A, 1500 V DC-PV3 for PV solar power application.
- Up to 2050 A, 1000 V DC-1
- GF and GAF are based on the well-proven AF technology
- Wide control voltage range (e.g. 100-250 V AC/DC)
- PLC interface, 24 V DC – 100 mA
The post ABB Contactors for DC switching appeared first on Adex.
]]>The post ABB AFS contactors for safety applications appeared first on Adex.
]]>
- Complying with main safety standards EN ISO 13849 and EN 62061 guaranteeing the safe use of machinery and equipment
- Contactors status guaranteed with factory-mounted auxiliary contact blocks
- Easy safety chain identification with the yellow housing
- Simplify calculation of installation safety level with safety values available in FSDT and Sistema tools
Main features
- Up to 400 kW – 400 V AC-3, 600 hp – 480 V and 1050 A – 690 V AC-1, 900 A – general use.
- B10d values available for the entire range
- Fast opening times as low as 20 MS for certain AFS contactors with PLC interface
- Mirror and mechanically linked contacts with 3rd party certificate
- Low energy auxiliary contacts feature a minimum switching capacity of 12V, 3 mA 10-7
- Built-in surge suppression
The post ABB AFS contactors for safety applications appeared first on Adex.
]]>The post ABB 4-pole B mini contactors appeared first on Adex.
]]>Main benefits
- Flattest mini contactor on the market
- No noise in operation thanks to the hum free coil
- Energy and cost saving
- Flexible use in any position.
Main features
- Up to 20 A, 690 V AC-1 and 16 A, 600 V general use
- 3 connection types available: screw, soldering pins & flat pins
- Special version with 1.4 W coil consumption for direct connection to PLC
Integrated protective circuit with diodes and an additional surge suppressor
The post ABB 4-pole B mini contactors appeared first on Adex.
]]>The post ABB Thermal overload relay appeared first on Adex.
]]>- Reliable protection for motors in the event of overload or phase failure
- Easy creation of individual motor starting solutions
- Perfect fit to ABB’s contactors: directly mounted and connected without further wiring
- Single mounting kits and accessories for remote control available for specific applications
- Selectable automatic reset mode allows to reduce downtimes and travelling costs
- In combination with ABB mini contactors, the installation in narrow spaces is possible
- Rated for AC and DC loads
Main features
- Trip class 10/10A
- Adjustable current setting ranges
- Overload protection with phase loss sensitivity
- Temperature compensation up to +70°C
- Selection between automatic or manual reset mode
- Stop and test function
- Finger safe housing (IP20)
- Large markings on the setting scale for precise setting
- Suitable for 1-phase applications
The post ABB Thermal overload relay appeared first on Adex.
]]>The post ABB AF 4-pole contactors appeared first on Adex.
]]>Main benefits
- Optimize logistics and cut administration costs with fewer product variants to handle
- Access global support and use the same products in all parts of the world
- A reduction of the coil’s energy consumption by 80% lets you save energy
- Secure your uptime by letting the AF technology overbridge voltage drops and sags.
Main features
- Up to 1000 A, 690 V AC-1 and 540 A, 600 V general use
- Only 4 coils cover 24 V – 500 V AC and 20 V – 500 V DC
- Built-in surge suppression
- Mirror and mechanically linked contacts
- Easy-to-use accessories through snap-to-connect function.
The post ABB AF 4-pole contactors appeared first on Adex.
]]>The post ABB AS 3-pole contactors appeared first on Adex.
]]>Main benefits
- Right performances at the right price
- Same dimensions in depth, width and height throughout the range in AC or DC control and for screw and spring terminals
- Reversing contactors in 90 mm width including mechanical and electrical interlocking without additional width
- Easy, fast and secure assembly of starters thanks to connection sets for direct-on-line, reversing and star-delta starters.
Main features
- Up to 7,5 kW – 400 V AC-3, 10 hp – 480 V and 24 V – AC-1, 20 V – general use
- Screw and spring connection types
- Direct control by PLC removing any use of interface relay and reducing panel power consumption
- Side clipped-on surge suppressors, integrated into overall contactor dimensions
- Mirror and mechanically linked contacts.
The post ABB AS 3-pole contactors appeared first on Adex.
]]>The post Siemens Contactors 2,3,4,8 & 10 Poles – 12V to 440V appeared first on Adex.
]]>Why Choose Siemens? Siemens stands as a leader in the field, specializing in the development and production of dependable motor contactors. Designed with the electrical engineer and panel builder in mind, Siemens contactors are built for durability, ensuring both excellent electrical and mechanical longevity. They are crafted to be adaptable, safe, and highly reliable.
Understanding SIRIUS The SIRIUS range represents a modular system that facilitates the seamless integration of components of varying sizes into your control cabinet. This system is renowned for its straightforward configuration and installation process.
Variety of Contactors Our selection includes Siemens contactors suitable for various control applications, available in:
- Multiple configurations: 2, 3, 4, 8, and 10 poles.
- Different coil voltages: 12 V, 24 V, 48 V, 110 V, 240 V, 400 V, and 440 V.
- Connection options: Screw or cage clamp terminals.
- Mounting options: DIN-Rail compatible.
- Utilisation categories such as AC1 and AC3.
- Sizes ranging from S00, handling up to 7.5 kW, to S0 for up to 18.5 kW, and S2 up to 37 kW.
Accessories and Components Explore our extensive range of accessories and parts for enhancing your system, including:
- Overload relays.
- Auxiliary contact blocks.
- Timers.
- Surge suppressors.
- Replacement coils.
Each component and accessory is designed for ease of installation, ensuring that you can upgrade or maintain your system efficiently.
The post Siemens Contactors 2,3,4,8 & 10 Poles – 12V to 440V appeared first on Adex.
]]>