Fluke Supplier in UAE - Adex International | +971 55 577 5434 https://adexuae.com/product-category/testing-and-measuring-instruments/fluke/ Adex International Tue, 26 May 2026 08:13:13 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://adexuae.com/wp-content/uploads/2023/10/cropped-Adex-logo-2.jpg-32x32.jpg Fluke Supplier in UAE - Adex International | +971 55 577 5434 https://adexuae.com/product-category/testing-and-measuring-instruments/fluke/ 32 32 FLUKE 902 FC TRMS HVAC CLAMP METER 600V https://adexuae.com/shop/fluke-902-fc-trms-hvac-clamp-meter-600v/ https://adexuae.com/shop/fluke-902-fc-trms-hvac-clamp-meter-600v/#respond Mon, 16 Dec 2024 11:57:05 +0000 https:/index.php/product/fluke-902-fc-trms-hvac-clamp-meter-600v/  # 902 FC

  • A wireless Fluke Connect®-enabled clamp meter designed specifically for the needs of HVAC technicians
  • Offers 200 µA DC current measurements to measure flame rod
  • Extends resistance range to measure thermistors up to 60kΩ

The post FLUKE 902 FC TRMS HVAC CLAMP METER 600V appeared first on Adex.

]]> Function A ac (via Jaw) Resolution 0.01/0.1 A Accuracy 2.0% ±5 digit (45-65 Hz) 2.5% ±5 digit (65-400 Hz) Range 60.00/600.0 A Crest Factor (50Hz or 60Hz) 2.5 MIN@220 A
3.0 MIN@180 A
> 1.4 MIN@600 A
Add 2% for CF>400 A V ac Resolution 0.1 V Accuracy 1.5% ±5 digits Range 600.0 V V dc Resolution 0.1 V Accuracy 1.5% ±5 digits Range 600.0 V Ohms Resolution 0.1/1/10 Accuracy 1% ±5 digits Range 600/6000/60.00 kΩ Capacitance Resolution 0.1/1 µF Accuracy 1% ±4 digits Range 100.0/1000 µF µA Resolution 0.1 µA Accuracy 1% ±5 digits Range 200 µA Contact temperature Resolution 0.1 C/F Accuracy 1% ±8 digits Range -40 to 400 °C (-40 °F to 752 °F) Continuity beeper Beeper volume 75 dBA nom. 15 cm. from case front On threshold <=30 Ω Mechanical and General Specifications Maximum voltage between any terminal and earth ground 1000 V Battery type 2 AA alkaline batteries, NEDA 15A, IEC LR6 Temperature Operating: -10 °C to +50 °C (14 °F to +122 °F)
Storage: -40 °C to +60 °C (-40 °F to +140 °F) Operating humidity Non condensing (< 10 °C [50 °F]), ≤90 % RH (at 10 °C to 30 °C [50 °F to 86 °F]), ≤75 % RH (at 30 °C to 40 °C (86 °F to 104 °F)), ≤45 % RH (at 40 °C to 50 °C (104 °F to 122 °F)) Altitude Operating: 3,000 m (9,842 ft)
Storage: 12,000 m (39,370 ft) Dimensions 230 x 83.7 x 45.4mm (9.06 x 3.30 x 1.39 in) Weight (meter only) 419 g (15 oz) Safety IEC 61010-1, Pollution Degree 2
IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V
IEC 61010-2-033: CAT III 1000 V / CAT IV 600 V IP Rating IEC 60529: IP30, non-operating Radio Frequency Certification FCC ID:T68-FBLE IC:6627A-FBLE Electromagnetic Compatibility (EMC) International: IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2 CISPR 11: Group 1, Class A Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. Temperature coefficients Add 0.1 × specified accuracy for each degree C above 28 °C or below 18 °C

The post FLUKE 902 FC TRMS HVAC CLAMP METER 600V appeared first on Adex.

]]> https://adexuae.com/shop/fluke-902-fc-trms-hvac-clamp-meter-600v/feed/ 0 FLUKE 375FC TRUE RMS AC/DC CLAMP METER 600A(1000V) https://adexuae.com/shop/fluke-375fc-true-rms-ac-dc-clamp-meter-600a1000v/ https://adexuae.com/shop/fluke-375fc-true-rms-ac-dc-clamp-meter-600a1000v/#respond Mon, 16 Dec 2024 11:57:03 +0000 https:/index.php/product/fluke-375fc-true-rms-ac-dc-clamp-meter-600a1000v/  # 375FC

  • True RMS AC/DC current measurements
  • 34mm diameter jaws
  • Measures AC current to 600A or 2500A with optional iFlex probes (sold separately)

The post FLUKE 375FC TRUE RMS AC/DC CLAMP METER 600A(1000V) appeared first on Adex.

]]> General Specifications

AC Current via JawRange600.0 AResolution0.1 AAccuracy2% ±5 digits (10 Hz to 100 Hz)2.5% ±5 digits (100-500 Hz)Crest Factor (50 Hz/60 Hz)3 @ 500 A2.5 @ 600 AAdd 2% for C.F. >2AC Current via Flexible Current ProbeRange2500 AResolution0.1 A (≤ 600 A)1 A (≤ 2500 A)Accuracy3% ±5 digits (5 – 500 Hz)Crest Factor (50/60Hz)3.0 at 1100 A2.5 at 1400 A1.42 at 2500 AAdd 2% for C.F. > 2DC CurrentRange600.0 AResolution0.1 AAccuracy2% ±5 digitsAC VoltageRange1000 VResolution0.1 V (≤600.0 V)1 V (≤1000 V)Accuracy1.5% ±5 digits (20 Hz to 500 Hz)DC VoltageRange1000 VResolution0.1 V (≤600.0 V)1 V (≤1000 V)Accuracy1% ±5 digitsmV dcRange500.0 mVResolution0.1 mVAccuracy1% ±5 digitsFrequency via JawRange5.0 Hz to 500.0 HzResolution0.1 HzAccuracy0.5% ±5 digitsTrigger level5 Hz to 10 Hz, ≥10 A10 Hz to 100 Hz, ≥5 A  Frequency via Flexible Current ProbeRange5.0 Hz to 500.0 HzResolution0.1 HzAccuracy0.5% ±5 digitsTrigger level5 Hz to 20 Hz, ≥25 A20 Hz to 100 Hz, ≥20 A100 Hz to 500 Hz, ≥25 AResistanceRange60 kΩResolution0.1 Ω (≤600 Ω)1 Ω (≤6000 Ω)10 Ω (≤60 kΩ)Accuracy1% ±5 digitsCapacitanceRange1000 μFResolution0.1 μF (≤ 100 μF)1 μ F (≤ 1000 μF)Accuracy1% ±4 digits

Mechanical Specifications

Maximum voltage between any terminal and earth ground1000 VBatteries2 AA, NEDA 15A, IEC LR6Operating temperature-10 °C to +50 °CStorage temperature-40 °C to +60 °COperating humidity –≤90% RH (at 10 °C to 30 °C)non-condensing (< 10°C)≤75% RH (at 30 °C to 40 °C)   Operating altitude3000 mStorage altitude12,000 mSize (L x W x H)249 x 85 x 45 mmWeight395 gJaw opening34 mmFlexible current probe diameter7.5 mmFlexible current probe cable length1.8 m(head to electronics connector)SafetyIEC 61010-1, Pollution Degree 2IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V    IP ratingIEC 60529: IP30, non-operatingRadio Frequency Certification FCC IDT68-FBLE IC:6627A-FBLEElectromagnetic Compatibility (EMC)InternationalIEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2CISPR 11: Group 1, Class AGroup 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purpose. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object.Korea (KCC)Class A Equipment (Industrial Broadcasting & Communication Equipment)Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.USA (FCC)47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.Temperature coefficientsAdd 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C

The post FLUKE 375FC TRUE RMS AC/DC CLAMP METER 600A(1000V) appeared first on Adex.

]]> https://adexuae.com/shop/fluke-375fc-true-rms-ac-dc-clamp-meter-600a1000v/feed/ 0 FLUKE 1524 HANDHELD THERMOMETER READOUT https://adexuae.com/shop/fluke-1524-handheld-thermometer-readout/ https://adexuae.com/shop/fluke-1524-handheld-thermometer-readout/#respond Mon, 16 Dec 2024 11:57:02 +0000 https:/index.php/product/fluke-1524-handheld-thermometer-readout/ Key features
  • Measure, graph, and record PRTs, thermocouples, and thermistors, supporting a wide range of temperature sensors.
  • Accuracy up to ±0.002 °C.
  • Quick sample readings in as little as 0.3 seconds.
  • 1524 has two channels for simultaneous measurements, doubling productivity.

The post FLUKE 1524 HANDHELD THERMOMETER READOUT appeared first on Adex.

]]> Specifications: Fluke Calibration 1524 Handheld Thermometer Readout
Specifications
Input channels 2
Logging 15,000 time and date stamped; 25 readings with statistics
Sample interval
(normal)		 1 second
Sample interval (fast mode) 0.3 seconds (see technical manual for details)
Sensor types PRTs, RTDs, thermistors, and thermocouples
Thermocouple types C, E, J, K, L, M, N, T, U, B, R, S
Operating temperature -10°C to 60°C (Best accuracy 13°C to 33°C)
Power requirements 3 AA alkaline batteries
Size 96 x 200 x 47 mm
(3.75 x 7.9 x 1.86 in)
Weight 0.65 kg (1.4 lb)
Environmental conditions for best accuracy 13°C to 33°C
Millivolt range and accuracy –10 mV to 75 mV ±(0.005% + 5 μV)
Resistance range and accuracy 0 Ω to 400 Ω ±(0.004% + 0.002 Ω)
200 Ω to 50 kΩ ±(0.01% + 0.5 Ω)
50 kΩ to 500 kΩ ± (0.03%)
Temperature coefficient, voltage (–10°C to 13°C, +33°C to 60°C) ±(0.001%/°C + 1 μV/°C)
Temperature coefficient, resistance (–10°C to 13°C, +33°C to 60°C) 0.0008%/°C + 0.0004 Ω (0 Ω to 400 Ω)
0.002%/°C + 0.1 Ω (0 Ω to 50 kΩ)
0.06%/°C + 0.1 Ω (50 kΩ to 500 kΩ)
Excitation current, resistance 1 mA (0 Ω to 400 Ω)
10 μA (0 Ω to 50 kΩ)
2 µA (50 kΩ to 500 kΩ)
Thermocouple Equivalent Temperature Accuracies (Readout Only)
Type B ±0.85°C from 600°C to 800°C
±0.68°C from 800°C to 1000°C
±0.57°C from 1000°C to 1800°C
Type C ±0.32°C from 100ºC to 550°C
±0.71°C from 550°C to 2300°C
Type E ±0.52°C from -200°C to 0°C
±0.22°C from 0°C to 950°C
Type J ±0.52°C from -200°C to 0°C
±0.23°C from 0°C to 1200°C
Type K ±0.61°C from -200°C to 0°C
±0.24°C from 0°C to 1370°C
Type L ±0.36°C from -200°C to 0°C
±0.23°C from 0°C to 1370°C
Type M ±0.26°C from -20°C to 0°C
±0.25°C from 0°C to 400°C
±0.22°C from 400°C to 1400°C
Type N ±0.72°C from -200°C to 0°C
±0.28°C from 0°C to 1300°C
Type R ±1.09°C from -20°C to 0°C
±0.97°C from 0°C to 500°C
±0.49°C from 500°C to 1750°C
Type S ±1.05°C from -20°C to 0°C
±0.95°C from 0°C to 500°C
±0.56°C from 500°C to 1750°C
Type T ±0.60°C from -200°C to 0°C
±0.25°C from 0°C to 400°C
Type U ±0.54°C from -200°C to 0°C
±0.24°C from 0°C to 400°C
Accuracies are based on internal reference junction compensation. Refer to technical manual for equivalent accuracies with an external reference junction.
1524 Accuracies with Selected Probes (±°C)
-200°C 5616-12: 0.014
5615-6: 0.025
5627A-12: 0.027
5610-9: n/a
0°C 5616-12: 0.021
5615-6: 0.021
5627A-12: 0.049
5610-9: 0.009
100°C 5616-12: 0.027
5615-6: 0.028
5627A-12: 0.065
5610-9: 0.009
300°C 5616-12: 0.040
5615-6: 0.043
5627A-12: 0.103
5610-9: n/a
420°C 5616-12: 0.050
5615-6: n/a
5627A-12: 0.130
5610-9: n/a
Includes readout accuracy, probe calibration, and probe drift
PRT Equivalent Temperature Accuracy (Readout only)
–100°C ±0.011
0°C ±0.015
100°C ±0.019
200°C ±0.023
400°C ±0.031
600°C ±0.039
Thermistor Equivalent Temperature Accuracy (Readout Only)
0°C ±0.002
25°C ±0.003
50°C ±0.006
75°C ±0.014
100°C ±0.030

The post FLUKE 1524 HANDHELD THERMOMETER READOUT appeared first on Adex.

]]> https://adexuae.com/shop/fluke-1524-handheld-thermometer-readout/feed/ 0 FLUKE 287-EUR TRUE RMS ELECTRONICS LOGGING MULTIMETER WITH TRENDCAPTURE https://adexuae.com/shop/fluke-287-eur-true-rms-electronics-logging-multimeter-with-trendcapture/ https://adexuae.com/shop/fluke-287-eur-true-rms-electronics-logging-multimeter-with-trendcapture/#respond Mon, 16 Dec 2024 11:57:01 +0000 https:/index.php/product/fluke-287-eur-true-rms-electronics-logging-multimeter-with-trendcapture/  # 287-EUR

  • True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened.
  • 50;000 count DMM features a large LCD display; 200 hours of data recording; graphical trend display.
  • Dual rated CAT IV 600V; CAT III 1000V

The post FLUKE 287-EUR TRUE RMS ELECTRONICS LOGGING MULTIMETER WITH TRENDCAPTURE appeared first on Adex.

]]> Specifications

FunctionDC voltsRange / resolution50.000 mV, 500.00 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0 VBasic accuracy0.025%AC voltsRange / resolution50.000 mV, 500.00 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0 VBasic accuracy0.4% (True-RMS)DC currentRange / resolution500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 ABasic accuracy0.05%AC currentRange / resolution500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 ABasic accuracy0.6% (True-RMS)Temperature (excluding probe)Range / resolution-200.0°C to 1350.0°C (-328.0°F to 2462.0°F)Basic accuracy1.0%ResistanceRange / resolution500.00 Ω, 5.0000 kΩ, 50.000 kΩ, 500.00 kΩ, 5.0000 MΩ, 50.00 MΩ, 500.0 MΩBasic accuracy0.05%CapacitanceRange / resolution1.000 n, 10.00 nF, 100.0 nF, 1.000 μF, 10.00 μF, 100.0 μF, 1000 μF, 10.00 mF, 100 mFBasic accuracy1.0%FrequencyRange / resolution99.999 Hz, 999.99 Hz, 9.9999 kHz, 99.999 kHz, 999.99 kHzBasic accuracy0.005%ConnectivityOptional infrared connector via Fluke ir3000 FCGeneral SpecificationsMaximum voltage between any terminal and earth ground1000 VBattery type6 AA alkaline batteries, NEDA 15A IECLR6Battery life100 hours minimum, 200 hours in logging modeTemperatureOperating-20°C to 55°CStorage-40°C to 60°CRelative humidity0 to 90% (0 t 37°C), 0 to 65% (37°C to 45°C), 0 to 45% (45°C to 55°C)Electromagnetic compatibilityEMC EN61326–1VibrationRandom vibration per MIL-PRF-28800F Class 2Shock1 meter drop per IEC/EN 61010–1 3rd EditionSize (H x W x L)22.2 x 10.2 x 6 cm (8.75 x 4.03 x 2.38 in)Weight870.9 g (28 oz)Multiple on screen displaysYesTrue-RMS AC bandwidth100 kHzdBV/dBmYesDC mV resolution1 μVMegohm rangeUp to 500 MΩConductance50.00 nSContinuity beeperYesBattery/fuse accessYes/YesElapse time clockYesTime of day clockYesMin-max-avgYesPeak250 μsDuty cycle0.01% to 99.99%Pulse width0.025 ms, 0.25 ms, 2.5 ms, 1250.0 msHoldYesIsolated optical interfaceYesAuto/touch holdYesReading memoryYesLog to PCYesInterval/event loggingYesLogging memoryUp to 10,000 readingsWireless connectivity (optional)Yes

The post FLUKE 287-EUR TRUE RMS ELECTRONICS LOGGING MULTIMETER WITH TRENDCAPTURE appeared first on Adex.

]]> https://adexuae.com/shop/fluke-287-eur-true-rms-electronics-logging-multimeter-with-trendcapture/feed/ 0 FLUKE 725 MULTIFUNCTION PROCESS CALIBRATOR https://adexuae.com/shop/fluke-725-multifunction-process-calibrator/ https://adexuae.com/shop/fluke-725-multifunction-process-calibrator/#respond Mon, 16 Dec 2024 11:56:58 +0000 https:/index.php/product/fluke-725-multifunction-process-calibrator/  # 725

  • Measure Volts DC; mA; RTDs; thermocouples; frequency; and ohms.
  • Source or simulate Volts DC; mA; RTDs; thermocouples; frequency and ohms.
  • Optional pressure modules to source/measure pressure

The post FLUKE 725 MULTIFUNCTION PROCESS CALIBRATOR appeared first on Adex.

]]> Measurement Accuracy Voltage DC 30.000 V 0.02% + 2 counts (upper display) 30.000 V 0.02% + 2 counts (lower display) 100.00 mV 0.02% + 2 counts -10.00 mV to 75.00 mV 0.025% + 1 count (via TC connector) Current DC 24.000 mA 0.02% + 2 counts Resistance 0.0 to 400.0 Ω 0.1 Ω (4-wire), 0.15 Ω (2- and 3-wire) 401 to 1500 Ω 0.5 Ω (4-wire), 1 Ω (2- and 3-wire) 1500 to 3200 Ω 1 Ω (4-wire), 1.5 Ω (2- and 3-wire) Frequency 2.0 to 1000.0 CPM 0.05% + 1 count 1.0 to 1100.0 Hz 0.05% + 1 count 1.00 to 10.00 kHz 0.05% + 1 count Sensitivity 1 V peak-to-peak-minimum Pressure Accuracy from 0.025% of range using any of 29 pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure. Source Accuracy Voltage DC 100.00 mV 0.02% + 2 counts 10.000 V 0.02% + 2 counts -10.00 mV to 75.00 mV 0.025% + 1 count (via TC connector) Current DC 24.000 mA (source) 0.02% + 2 counts 24.000 mA (simulate) 0.02% + 2 counts Resistance 15.0 to 400.0 Ω 0.15 Ω (exc. current 0.15 to 0.5 mA), 0.1 Ω (exc. current 0.5 to 2 mA) 401 to 1500 Ω 0.5 Ω (excitation current 0.05 to 0.8 mA) 1500 to 3200 Ω 1 Ω (excitation current 0.05 to 0.4 mA) Frequency 2.0 to 1000.0 CPM 0.05% 1.0 to 1100.0 Hz 0.05% 1.00 to 10.00 kHz 0.25% Waveform 5 V p-p squarewave, -0.1 V offset RTDs and Thermocouples Measure accuracy NI-120 0.2°C PT-100 (385) 0.33°C PT-100 (393) 0.3°C PT-100 (JIS) 0.3°C PT-200 (385) 0.2°C PT-500 (385) 0.3°C PT-1000 (385) 0.2°C Resolution 0.1°C J 0.7°C K 0.8°C T 0.8°C E 0.7°C R 1.8°C S 1.5°C B 1.4°C L 0.7°C U 0.75°C N 0.9°C Resolution J, K, T, E, L, N, U: 0.1°C, 0.1°F B, R, S: 1°C, 1°F XK 0.6°C BP 1.2°C Source accuracy NI-120 0.2°C PT-100 (385) 0.33°C PT-100 (393) 0.3°C PT-100 (JIS) 0.3°C PT-200 (385) 0.2°C PT-500 (385) 0.3°C PT-1000 (385) 0.2°C Resolution 0.1°C Accuracy stated for 4-wire measurement. J 0.7°C K 0.8°C T 0.8°C E 0.7°C R 1.4°C S 1.5°C B 1.4°C L 0.7°C U 0.75°C N 0.9°C Resolution J, K, T, E, L, N, U: 0.1°C, B, R, S: 1°C XK 0.6°C BP 1.2°C Specifications Ramp functions Source functions Voltage, current, resistance, frequency, temperature Ramps Slow ramp, Fast ramp, 25% step-ramp Loop power function Voltage 24 V Accuracy 10% Maximum current 22 mA, short circuit protected Step functions Source functions Voltage, current, resistance, frequency, temperature Steps 25% of range, 100% of range Environmental Specifications Operating temperature -10°C to +55°C Storage temperature -20°C to 71°C Operating altitude 3000 m Safety Specifications Agency approvals EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 Mechanical and General Specifications Size 130 x 236 x 61 mm Weight 0.65 kg Batteries 4 AA alkaline batteries Battery replacement Separate battery compartment, accessable without breaking calibration seal Side port connections Pressure module connector, also used for remote real-time programming

The post FLUKE 725 MULTIFUNCTION PROCESS CALIBRATOR appeared first on Adex.

]]> https://adexuae.com/shop/fluke-725-multifunction-process-calibrator/feed/ 0 FLUKE 805 FC VIBRATION METER WITH FLUKE CONNECT https://adexuae.com/shop/fluke-805-fc-vibration-meter-with-fluke-connect/ https://adexuae.com/shop/fluke-805-fc-vibration-meter-with-fluke-connect/#respond Mon, 16 Dec 2024 11:56:56 +0000 https:/index.php/product/fluke-805-fc-vibration-meter-with-fluke-connect/  # 805 FC

  • Overall vibration measurement (10 Hz to 1;000 Hz) for acceleration; velocity and displacement units of measurement for a wide variety of machines
  • Memory holds up to 3;500 measurements
  • Features Fluke Connect

The post FLUKE 805 FC VIBRATION METER WITH FLUKE CONNECT appeared first on Adex.

]]> Specifications

Low frequency range (overall measurement)10 Hz to 1,000 HzHigh frequency range (CF+ measurement)4,000 Hz to 20,000 HzSeverity levelsGood, satisfactory, unsatisfactory, unacceptableVibration limit50 g peak (100 g peak-peak)A/D converter16-bitSignal to noise ratio80 dBSampling rateLow frequency: 20,000 Hz
High frequency: 80,000 HzReal time clock backupCoin batterySensorSensitivity100 mV g ± 10%Measurement range0.01 g to 50 gLow frequency range (overall measurement)10 Hz to 1,000 HzHigh frequency range4,000 Hz to 20,000 HzResolution0.01 gAccuracyAt 100 Hz ± 5% of measured valueAmplitude UnitsAccelerationg, m/sec²Velocityin/sec, mm/secDisplacementmils, mmInfrared Thermometer (Temperature Measurement)Range-20 °C to 200 °C (-4 °F to 392 °F)Accuracy±2 °C (4 °F)Focal lengthFixed, at ~3.8 cm (1.5″)External SensorNote: Fluke supports but does not provide external sensorsFrequency range10 Hz to 1,000 HzBias voltage (to supply power)20 V dc to 22 V dcBias current (to supply power)Maximum 5 mAFirmwareExternal interfacesUSB 2.0 (full speed) communicationData capacityDatabase on internal flash memoryUpgradeThrough USBMemoryUp to 3,500 measurementsRadiated EmissionElectrostatic discharge: burstStandard EN 61000-4-2Electromagnetic interferenceStandard EN 61000-4-3REStandard CISPR 11, Class AEnvironmentalOperating temperature-20 °C to 50 °C (-4 °F to 122 °F)Storage temperature-30 °C to 80 °C (-22 °F to 176 °F)Operating humidity10% to 95% RH (non-condensing)Operating/storage altitudeSea level to 3,048 meters (10,000 feet)IP ratingIP54Vibration limit500g peakDrop test1 meterGeneral SpecificationsBattery typeAA (2) Lithium Iron DisulfideBattery life250 measurementsSize (L x W x H)24.1 cm x 7.1 cm x 5.8 cm
(9.5 in x 2.8 in x 2.3 in)Weight0.40 kg (0.89 lb)ConnectorsUSB mini-B 7-pin, external sensor jack (SMB connector)

The post FLUKE 805 FC VIBRATION METER WITH FLUKE CONNECT appeared first on Adex.

]]> https://adexuae.com/shop/fluke-805-fc-vibration-meter-with-fluke-connect/feed/ 0 FLUKE 789-E PROCESS METER https://adexuae.com/shop/fluke-789-e-process-meter/ https://adexuae.com/shop/fluke-789-e-process-meter/#respond Mon, 16 Dec 2024 11:56:53 +0000 https:/index.php/product/fluke-789-e-process-meter/  # 789-E

  • Full-featured loop calibrator and 1000V digital multimeter combined into a single handheld unit.
  • 20 mA DC current source / loop calibrator / simulator
  • Double-sized; dual display

The post FLUKE 789-E PROCESS METER appeared first on Adex.

]]> Specifications Current measurement Range 0-1 A AC or DC Resolution 1 mA Accuracy 0.2% + 2 LSD (DC) Range 0-30 mA Resolution 0.001 mA Accuracy 0.05% + 2 lSD Current sourcing Range 0-20 mA or 4-20 mA Resolution 0.05% of span Drive capability 24 V Compliance or 1200 Ω @ 20 mA Frequency to 19.999 kHz, 0.005% + 1 LSD Continuity Beeps for resistance < 100 Ω Voltage measurement Range 0-1000 V AC (true-rms) or DC Resolution 0.1 mV to 1.0 V Accuracy 0.1% Rdg + 1 LSD (VDC) Resistance measurement to 40 MΩ, 0.2% + 1 LSD Diode test 2.0 V shoes diode voltage drop Display current and % of span Yes Auto Step, Auto Ramp Yes Environmental Specifications Operating temperature -20°C to 55°C Storage temperature -40°C to 60°C Humidity (without condensation) 95% up to 30°C
75% up to 40°C
45% up to 50°C
35% up to 55°C Temperature coefficient 0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C) Safety Specifications Electrical safety Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92 Overvoltage category IEC 1010-1 CAT III 1000 V
IEC 1010-1 CAT IV 600 V Maximum voltage 1000 V RMS Mechanical and General Specifications Size (H x W x L) 50 x 100 x 203 mm (1.25 x 3.41 x 7.35 in) Weight 610 g (1.6 lbs) Batteries 4 AA alkaline batteries Warranty 3 years Battery life 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) Shock and vibration Random, 2 g, 5-500 Hz
1 meter drop test

The post FLUKE 789-E PROCESS METER appeared first on Adex.

]]> https://adexuae.com/shop/fluke-789-e-process-meter/feed/ 0 FLUKE 754 HART DOCUMENTING PROCESS CALIBRATOR https://adexuae.com/shop/fluke-754-hart-documenting-process-calibrator/ https://adexuae.com/shop/fluke-754-hart-documenting-process-calibrator/#respond Mon, 16 Dec 2024 11:56:50 +0000 https:/index.php/product/fluke-754-hart-documenting-process-calibrator/  # 754

  • HART Communications capability. Measure: 300V AC/DC; 110mA DC. Source: 15V DC; 22mA DC.
  • Measure volts; mA; RTDs; thermocouples; frequency; and ohms to test sensors; transmitters and other instruments
  • Bright white dual display. Read both sourced and measured parameters simultaneously.

The post FLUKE 754 HART DOCUMENTING PROCESS CALIBRATOR appeared first on Adex.

]]> Measurement AccuracyVoltage DCRange/ Resolution1 Year2 Years100.000 mV0.02% + 0.005 mV0.03% + 0.005 mV3.00000 V0.02% + 0.00005 V0.03% + 0.00005 V30.0000 V0.02% + 0.0005 V0.03% + 0.0005 V300.00 V0.05% + 0.05 V0.07% + 0.05 VVoltage AC3.000 V (40 Hz to 500 Hz) / 0.001 V0.5% + 0.002 V1.0% + 0.004 V30.00 V (40 Hz to 500 Hz) / 0.01 V0.5% + 0.02 V1.0% + 0.04 V300.0 V (40 Hz to 500 Hz) / 0.1 V0.5% + 0.2 V1.0% + 0.2 VCurrent DC30.000 mA0.01% + 5 uA0.015% + 7 uA110.00 mA0.01% + 20 uA0.015% + 30 uAResistance10.000 Ω0.05% + 50 mΩ0.07% + 70 mΩ100.00 Ω0.05% + 50 mΩ0.07% + 70 mΩ1.0000 kΩ0.05% + 500 mΩ0.07% + 0.5 Ω10.000 kΩ0.1% + 10 Ω0.15% + 15 ΩFrequency1.00 to 110.00 Hz / 0.01 Hz 0.05 Hz110.1 to 1100.0 Hz / 0.1 Hz 0.5 Hz1.101 to 11.000 kHz / 0.001 kHz 0.005 kHz11.01 to 50.00 kHz / 0.01 kHz 0.05 kHzSource Accuracy  1 Year2 YearsVoltage DC100.000 mV0.01% + 0.005 mV0.015% + 0.005 mV1.00000 V0.01% + 0.00005 V0.015% + 0.0005 V15.0000 V0.01% + 0.0005 V0.015% + 0.0005 VCurrent DC22.000 mA (source)0.01% + 0.003 mA0.02% + 0.003 mACurrent sink (simulate)0.02% + 0.007 mA0.04% + 0.007 mAResistance10.000 Ω0.01% + 10 mΩ0.015% + 15 mΩ100.00 Ω0.01% + 20 mΩ0.015% + 30 mΩ1.0000 kΩ0.02% + 0.2 Ω0.03% + 0.3 Ω10.000 kΩ0.02% + 3 Ω0.03% + 5 ΩFrequency0.1 to 10.99 Hz 0.01 Hz0.01 to 10.99 Hz 0.01 Hz11.00 to 109.99 Hz 0.1 Hz110.0 to 1099.9 Hz 0.1 Hz1.100 to 21.999 kHz 0.002 kHz22.000 to 50.000 kHz 0.005 kHzTechnical DataData log functionsMeasure functionsVoltage, current, resistance, frequency, temperature, pressureReading rate1, 2, 5, 10, 20, 30, or 60 readings/minuteMaximum record length8000 readings (7980 for 30 or 60 readings/minute)Ramp functionsSource functionsVoltage, current, resistance, frequency, temperatureRate4 steps/secondTrip detectContinuity or voltage (continuity detection not available when sourcing current)Loop power functionVoltageSelectable, 26 VAccuracy10%, 18 V minimum at 22 mAMaximum current25 mA, short circuit protectedMaximum input voltage50 V DCStep functionsSource functionsVoltage, current, resistance, frequency, temperatureManual stepSelectable step, change with arrow buttonsAutostepFully programmable for function, start delay, stepvalue, time per step, repeatEnvironmental SpecificationsOperating temperature-10°C to +50°CStorage temperature-20°C to +60°CDust/water resistanceMeets IP52, IEC 529Operating altitude3000 m above mean sea level (9842 ft)Safety SpecificationsAgency approvalsCAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993Mechanical and General SpecificationsSize136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in)Weight1.2 kg (2.7 lb)BatteriesInternal Battery Pack Li-ion: 7.2V,4400mAh, 30 WhBattery life>8 hours typicalBattery replacementReplace without opening calibrator; no tools requiredSide port connectionsPressure module connectorUSB Connector to interface to your PCDigital instrument (HART) connectorConnection for optional battery charger/eliminatorData storage capacity1 week of calibration procedures results90 day specificationsThe standard specification interval for the 750 Seriesare 1 and 2 years.Typical 90 day measurement and source accuracy can be estimated by dividing the one year “% of reading” or “% of output” specifications by 2.Floor specifications, expressed as “% of full scale” or “counts” or “ohms” remain constant.Temperature, Resistance Temperature DetectorsDegrees or % of reading – Type (α)Range °CMeasure °C1 1 year2 year100 Ω Pt (385)-200 to 100
100 to 8000.07°C
0.02% + 0.05°C0.14°C
0.04% + 0.10°C200 Ω Pt (385)-200 to 100
100 to 6300.07°C
0.02% + 0.05°C0.14°C
0.04% + 0.10°C500 Ω Pt (385)-200 to 100
100 to 6300.07°C
0.02% + 0.05°C0.14°C
0.04% + 0.10°C1000 Ω Pt (385)-200 to 100
100 to 6300.07°C
0.02% + 0.05°C0.14°C
0.04% + 0.10°C100 Ω Pt (3916)-200 to 100
100 to 6300.07°C
0.02% + 0.05°C0.14°C
0.04% + 0.10°C100 Ω Pt (3926)-200 to 100
100 to 6300.08°C
0.02% + 0.06°C0.16°C
0.04% + 0.12°C10 Ω Cu (427)-100 to 2600.2°C0.4°C120 Ω Ni (672)-80 to 2600.1°C0.2°CSource currentSource °CAllowable current2 1 year2 year 1 mA0.05°C
0.0125% + 0.04°C0.10°C
0.025% + 0.08°C0.1 mA to 10 mA500 μA0.06°C
0.017% + 0.05°C0.12°C
0.034% + 0.10°C0.1 mA to 1 mA250 μA0.06°C
0.017% + 0.05°C0.12°C
0.034% + 0.10°C0.1 mA to 1 mA150 μA0.06 C
0.017% + 0.05°C0.12 C
0.034% + 0.10°C0.1 mA to 1 mA1 mA0.05°C
0.0125% + 0.04°C0.10°C
0.025% + 0.08°C0.1 mA to 10 mA1 mA0.05°C
0.0125% + 0.04°C0.10°C
0.025% + 0.08°C0.1 mA to 10 mA3 mA0.2°C0.4°C0.1 mA to 10 mA1 mA0.04°C0.08°C0.1 mA to 10 mA1. For two and three-wire RTD measurements, add 0.4°C to the specifications.
2. Supports pulsed transmitters and PLCs with pulse times as short as 1 msTemperature, ThermocouplesTypeSource °CMeasure °CSource °C  1 year2 years1 year2 yearsE-250 to -2001.32.00.60.9-200 to -1000.50.80.30.4-100 to 6000.30.40.30.4600 to 10000.40.60.20.3N-200 to -1001.01.50.60.9-100 to 9000.50.80.50.8900 to 13000.60.90.30.4J-210 to -1000.60.90.30.4-100 to 8000.30.40.20.3800 to 12000.50.80.30.3K-200 to -1000.71.00.40.6-100 to 4000.30.40.30.4400 to 12000.50.80.30.41200 to 13720.71.00.30.4T-250 to -2001.72.50.91.4-200 to 00.60.90.40.60 to 4000.30.40.30.4B600 to 8001.32.01.01.5800 to 10001.01.50.81.21000 to 18200.91.30.81.2R-20 to 02.32.81.21.80 to 1001.52.21.11.7100 to 17671.01.50.91.4S-20 to 02.32.81.21.80 to 2001.52.11.11.7200 to 14000.91.40.91.41400 to 17671.11.71.01.5C0 to 8000.60.90.60.9800 to 12000.81.20.71.01200 to 18001.11.60.91.41800 to 23162.03.01.32.0L-200 to -1000.60.90.30.4-100 to 8000.30.40.20.3800 to 9000.50.80.20.3U-200 to 00.60.90.40.60 to 6000.30.40.30.4BP0 to 10001.01.50.40.61000 to 20001.62.40.60.92000 to 25002.03.00.81.2XK-200 to 3000.20.30.20.5300 to 8000.40.60.30.6

The post FLUKE 754 HART DOCUMENTING PROCESS CALIBRATOR appeared first on Adex.

]]> https://adexuae.com/shop/fluke-754-hart-documenting-process-calibrator/feed/ 0 FLUKE 773 ADVANCED MILLIAMP PROCESS CLAMP-METER https://adexuae.com/shop/fluke-773-advanced-milliamp-process-clamp-meter/ https://adexuae.com/shop/fluke-773-advanced-milliamp-process-clamp-meter/#respond Mon, 16 Dec 2024 11:56:48 +0000 https:/index.php/product/fluke-773-advanced-milliamp-process-clamp-meter/  # 773

  • Loop calibrator that measures 4 to 20 mA signals without breaking the loop
  • Features best in class 0.2% accuracy
  • Sources 4 to 20 mA signals for testing control system I/O or I/Ps

The post FLUKE 773 ADVANCED MILLIAMP PROCESS CLAMP-METER appeared first on Adex.

]]> Specifications Diameter of measurable conductor 0.177″ or 4.5 mm max Operating temperature -10 to 50ºC Storage temperature -25 to 60ºC Operating humidity < 90% @ <30ºC, < 75% @ 30 to 55ºC Operating altitude 0 to 2000 m IP rating IP 40 Size 44 x 70 x 246 mm (2 7/8 x 5 ¾ x 11 5/8 in) Weight 410 g, (14.4 oz) Vibration Random 2 g, 5 to 500 Hz Shock 1 meter drop test (except the jaw) EMI/RFI Meets EN61326-1 For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m. Temperature coefficient 0.01% ºC
(< 18ºC or > 28ºC) Power, battery life (4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms Warranty Three years for electronics
One year for cable and clamp assembly Functional Specifications mA measurement
(measured by clamp) Resolution / range 0 to 20.99 mA Accuracy 0.2% + 5 counts Resolution / range 21.0mA to 100.0 mA Accuracy 1% + 5 counts mA measurement (measured in series with test jacks) Resolution / range 0 to 24.00 mA Accuracy 0.2% + 2 counts mA source (maximum mA drive: 24 mA into 1,000 ohms) Resolution / range 0 to 24.00 mA Accuracy 0.2% + 2 counts mA simulate (maximum voltage 50 V dc) Resolution / range 0 to 24.00 mA Accuracy 0.2% + 2 counts Voltage source (2 mA maximum drive current) Resolution / range 0 to 10.00 V DC Accuracy 0.2% + 2 counts Voltage measure Resolution / range 0 to 30.00 V DC Accuracy 0.2% + 2 counts

The post FLUKE 773 ADVANCED MILLIAMP PROCESS CLAMP-METER appeared first on Adex.

]]> https://adexuae.com/shop/fluke-773-advanced-milliamp-process-clamp-meter/feed/ 0 FLUKE 1630-2 FC EARTH GROUND CLAMP METER 1000V https://adexuae.com/shop/fluke-1630-2-fc-earth-ground-clamp-meter-1000v/ https://adexuae.com/shop/fluke-1630-2-fc-earth-ground-clamp-meter-1000v/#respond Mon, 16 Dec 2024 11:56:45 +0000 https:/index.php/product/fluke-1630-2-fc-earth-ground-clamp-meter-1000v/  # 1630-2 FC

  • Earth ground ac leakage current measurement
  • Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.
  • Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.

The post FLUKE 1630-2 FC EARTH GROUND CLAMP METER 1000V appeared first on Adex.

]]>
Electrical Specifications
Maximum voltage to earth ground 1000 V
Battery type AA alkaline IEC/EN LR6 (x4)
Battery life More than 15 hours*
* In Ground Resistance measurement mode, with backlight turned off, and RF mode turned off
Frequency range 40 Hz to 1 kHz
Ingress protection IEC/EN 60529: IP30 with jaw closed
LCD Digital reading 9999 counts
Refresh rate 4 per second
Operating temperature -10 °C to + 50 °C
Storage temperature -20 °C to + 60 °C
Operating humidity Non condensing (<10 °C) (< 50 °F)
≤90% RH (at 10 °C to 30 °C [50 °F to 86 °F])
≤75% RH (at 30 °C to 40 °C [86 °F to 104 °F])
≤45% RH (at 40 °C to 50 °C [104 °F to 122 °F])
(Non condensing)
Operating altitude 2000 m (6561 feet)
Storage altitude 12 000 m (39,370 feet)
Reference temperature 23 °C ±5 °C (73 °F ±9 °F)
Temperature coefficient 0.15% x (specified accuracy)/ °C (<18 °C or >28 °C [<64.4 °F or >82.4 °F])
Overload indication OL
Data logging capacity Minimum of 32,760 measurements
Data logging interval 1 second to 59 minutes and 59 seconds
Display reading specification with standard loop resistance
Input (Ω) Minimum Maximum
0.474 0.417 0.531
0.5 0.443 0.558
10 9.55 10.45
100 96 104
Safety
General IEC/EN 61010-1: Pollution Degree 2 IEC/EN 61557-1
Measurement IEC/EN 61010-2-032: CAT IV 600 V / CAT III 1000 V
Current clamp for leakage current measurements IEC/EN 61557-13: Class 2, ≤30 A/m
Resistance to earth IEC/EN 61557-5
Effectiveness of thepProtective measures IEC/EN 61557-16
Electromagnetic compatibility (EMC) International IEC/EN 61326-1: Portable Electromagnetic Environment
CISPR 11: Group 1, Class B, IEC/EN 61326-2-2
Korea (KCC) Class A equipment (Industrial Broadcast & Communications Equipment)
USA (FCC) 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103
Wireless Radio
Frequency range 2412 MHz to 2462 MHz
Output power <10 mW
Radio frequency certification FCC ID:T68-FBLE IC:6627A-FBLE
General Specifications
Conductor size 40 mm (1.57 in) approximately
Dimensions (L x W x H) 283 x 105 x 48 mm (11.1 x 4.1 x 1.9 in)
Weight 880g (31 oz)
Warranty One year
Earth Ground Loop Resistance
Range Accuracy1  ± (% of reading + Ω)
0.025 Ω to 0.249 Ω 1.5% + 0.02 Ω
0.250 Ω to 0.999 Ω 1.5% + 0.05 Ω
1.000 Ω to 9.999 Ω 1.5% + 0.10 Ω
10.00 Ω to 49.99 Ω 1.5% + 0.30 Ω
50.00 Ω to 99.99 Ω 1.5% + 0.50 Ω
100.0 Ω to 199.9 Ω 3.0% + 1.0 Ω
200.0 Ω to 399.9 Ω 5.0% + 5.0 Ω
400 Ω to 599 Ω 10.0% + 10 Ω
600 Ω to 1500 Ω 20.00%
1  Loop resistance with no inductance, conductor centered and perpendicular to jaw
Earth ground leakage current mA
Autorange 50/60 Hz, True rms, crest factor CF ≤3
Range Resolution Accuracy1  ± (% of reading + mA)
0.200 mA to 3.999 mA 1 μA 2.0% + 0.05 mA
4.00 mA to 39.99 mA 10 μA 2.0% + 0.03 mA
40.0 mA to 399.9 mA 100 μA 2.0% + 0.3 mA
0.400 A to 3.999 A 1 mA 2.0% + 3 mA
4.00 A to 39.99 A 10 mA 2.0% + 30 mA