Current Clamp PCE-MCM 10

Availability : in stock
Category:
Share:

HIGHLIGHTS

– Detachable process clamp meter with 1 m / 3.3 ft cable
– Clamp opening of 5 mm diameter
– Measurement range ±99.9 mA DC
– Display with backlight
– Operating time of approx. 40 hours
– Optional ISO calibration certificate

DESCRIPTION

Current Clamp with 1 m (3.3 ft) cable / measurement range ±99.9 mA DC / manual zero point /
battery life of approx. 40 hours / automatic power off / clamp opening Ø 5 mm /
  accuracy of ±0.3 % of rdg./ optional ISO calibration certificate
The current clamp has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the current clamp is a particularly accurate measuring instrument. In order to conveniently perform measurements with the current clamp, the current clamp itself is connected to a 1 meter / 3.3 ft cable. The current clamp can thus be attached to the cable to be measured. The current clamp can be conveniently placed aside at the workplace. This leaves both hands free while reading the measured values, for example to carry out adjustments or configurations on the process technology. Due to the high accuracy and the external sensor, the current clamp is ideally suited to make quick and reliable current measurements when process signals are involved.
In order to carry out a current measurement, the current clamp of the current clamp must be clamped around the cable to be checked. This allows the current clamp to measure the flowing current inductively. This has the particular advantage that a current measurement can be carried out during operation with the current clamp.
For improved visibility, the current clamp is equipped with an LED. With the LED of the current clamp, the measuring spot can be ideally illuminated. Optionally, the current clamp can be delivered with an ISO calibration certificate.
If you have any further questions about the PCE-MCM 10 current clamp, please take a look at the following technical data or use our contact form. Our technicians and engineers will be happy to advise you on the current clamp or any other products in the fields of control, laboratory or measuring technology or scales and balances from PCE Instruments.

SPECIFICATION

Measuring range ±20.99 mA DC
Resolution 0.01 mA
Accuracy ±(0.3 % of rdg. + 8 Digits)
Measuring range ±21.0 … ±99.9 mA DC
Resolution 0.1 mA DC
Accuracy ±(1 % of rdg. + 8 Digits)
Influence of the earth’s magnetic field on the measured value, max. 0.25 mA DC
Diameter of clamp opening Ø5 mm
Switch-off automatic
Continuously switched on after 10 minutes OFF
Operating voltage 3V via 2 AA batteries
Battery life approx. 40 hours
Protection class IP40
Overvoltage categories CAT II 300V
Operating conditions -10 … 50°C / 14 … 122°F
Storage conditions -15 … 60°C / 5 … 140°F
Environmental humidity <90% RH at < 30°C / 86°F
<75% RH at 30 … 50°C / 86 … 122°F
Working altitude 0 … 2000 m / 6,561 ft above sea level
Dimensions handheld device: 180 x 55 x 39 mm / 7.1 x 2.2 x 1.5 in
current clamp: 90 x 40 x 1.5 mm / 3.5 x 1.6 x 0.06 in
cable length: approx. 1 m / 3.3 ft
Weight 268 g / 0.6 lbs with batteries inserted

DELIVERY SCOPE

1 x Clamp Meter PCE-MCM 10
2 x 3V via 2 AA batteries
1 x Instruction manual

There are no reviews yet.

Be the first to review “Current Clamp PCE-MCM 10”

Your email address will not be published. Required fields are marked *