General SpecificationsAC Current via JawRange600.0 AResolution0.1 AAccuracy2% ±5 digits (10 Hz to 100 Hz)2.5% ±5 digits (100-500 Hz)Crest Factor (50 Hz/60 Hz)3 @ 500 A2.5 @ 600 AAdd 2% for C.F. >2AC Current via Flexible Current ProbeRange2500 AResolution0.1 A (≤ 600 A)1 A (≤ 2500 A)Accuracy3% ±5 digits (5 – 500 Hz)Crest Factor (50/60Hz)3.0 at 1100 A2.5 at 1400 A1.42 at 2500 AAdd 2% for C.F. > 2DC CurrentRange600.0 AResolution0.1 AAccuracy2% ±5 digitsAC VoltageRange1000 VResolution0.1 V (≤600.0 V)1 V (≤1000 V)Accuracy1.5% ±5 digits (20 Hz to 500 Hz)DC VoltageRange1000 VResolution0.1 V (≤600.0 V)1 V (≤1000 V)Accuracy1% ±5 digitsmV dcRange500.0 mVResolution0.1 mVAccuracy1% ±5 digitsFrequency via JawRange5.0 Hz to 500.0 HzResolution0.1 HzAccuracy0.5% ±5 digitsTrigger level5 Hz to 10 Hz, ≥10 A10 Hz to 100 Hz, ≥5 A  Frequency via Flexible Current ProbeRange5.0 Hz to 500.0 HzResolution0.1 HzAccuracy0.5% ±5 digitsTrigger level5 Hz to 20 Hz, ≥25 A20 Hz to 100 Hz, ≥20 A100 Hz to 500 Hz, ≥25 AResistanceRange60 kΩResolution0.1 Ω (≤600 Ω)1 Ω (≤6000 Ω)10 Ω (≤60 kΩ)Accuracy1% ±5 digitsCapacitanceRange1000 μFResolution0.1 μF (≤ 100 μF)1 μ F (≤ 1000 μF)Accuracy1% ±4 digitsMechanical SpecificationsMaximum voltage between any terminal and earth ground1000 VBatteries2 AA, NEDA 15A, IEC LR6Operating temperature-10 °C to +50 °CStorage temperature-40 °C to +60 °COperating humidity –≤90% RH (at 10 °C to 30 °C)non-condensing (< 10°C)≤75% RH (at 30 °C to 40 °C)   Operating altitude3000 mStorage altitude12,000 mSize (L x W x H)249 x 85 x 45 mmWeight395 gJaw opening34 mmFlexible current probe diameter7.5 mmFlexible current probe cable length1.8 m(head to electronics connector)SafetyIEC 61010-1, Pollution Degree 2IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V    IP ratingIEC 60529: IP30, non-operatingRadio Frequency Certification FCC IDT68-FBLE IC:6627A-FBLEElectromagnetic Compatibility (EMC)InternationalIEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2CISPR 11: Group 1, Class AGroup 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purpose. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object.Korea (KCC)Class A Equipment (Industrial Broadcasting & Communication Equipment)Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.USA (FCC)47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.Temperature coefficientsAdd 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C