FLUKE 754 HART DOCUMENTING PROCESS CALIBRATOR

Availability : in stock
Share:

 # 754

  • HART Communications capability. Measure: 300V AC/DC; 110mA DC. Source: 15V DC; 22mA DC.
  • Measure volts; mA; RTDs; thermocouples; frequency; and ohms to test sensors; transmitters and other instruments
  • Bright white dual display. Read both sourced and measured parameters simultaneously.

Measurement AccuracyVoltage DCRange/ Resolution1 Year2 Years100.000 mV0.02% + 0.005 mV0.03% + 0.005 mV3.00000 V0.02% + 0.00005 V0.03% + 0.00005 V30.0000 V0.02% + 0.0005 V0.03% + 0.0005 V300.00 V0.05% + 0.05 V0.07% + 0.05 VVoltage AC3.000 V (40 Hz to 500 Hz) / 0.001 V0.5% + 0.002 V1.0% + 0.004 V30.00 V (40 Hz to 500 Hz) / 0.01 V0.5% + 0.02 V1.0% + 0.04 V300.0 V (40 Hz to 500 Hz) / 0.1 V0.5% + 0.2 V1.0% + 0.2 VCurrent DC30.000 mA0.01% + 5 uA0.015% + 7 uA110.00 mA0.01% + 20 uA0.015% + 30 uAResistance10.000 Ω0.05% + 50 mΩ0.07% + 70 mΩ100.00 Ω0.05% + 50 mΩ0.07% + 70 mΩ1.0000 kΩ0.05% + 500 mΩ0.07% + 0.5 Ω10.000 kΩ0.1% + 10 Ω0.15% + 15 ΩFrequency1.00 to 110.00 Hz / 0.01 Hz 0.05 Hz110.1 to 1100.0 Hz / 0.1 Hz 0.5 Hz1.101 to 11.000 kHz / 0.001 kHz 0.005 kHz11.01 to 50.00 kHz / 0.01 kHz 0.05 kHzSource Accuracy  1 Year2 YearsVoltage DC100.000 mV0.01% + 0.005 mV0.015% + 0.005 mV1.00000 V0.01% + 0.00005 V0.015% + 0.0005 V15.0000 V0.01% + 0.0005 V0.015% + 0.0005 VCurrent DC22.000 mA (source)0.01% + 0.003 mA0.02% + 0.003 mACurrent sink (simulate)0.02% + 0.007 mA0.04% + 0.007 mAResistance10.000 Ω0.01% + 10 mΩ0.015% + 15 mΩ100.00 Ω0.01% + 20 mΩ0.015% + 30 mΩ1.0000 kΩ0.02% + 0.2 Ω0.03% + 0.3 Ω10.000 kΩ0.02% + 3 Ω0.03% + 5 ΩFrequency0.1 to 10.99 Hz 0.01 Hz0.01 to 10.99 Hz 0.01 Hz11.00 to 109.99 Hz 0.1 Hz110.0 to 1099.9 Hz 0.1 Hz1.100 to 21.999 kHz 0.002 kHz22.000 to 50.000 kHz 0.005 kHzTechnical DataData log functionsMeasure functionsVoltage, current, resistance, frequency, temperature, pressureReading rate1, 2, 5, 10, 20, 30, or 60 readings/minuteMaximum record length8000 readings (7980 for 30 or 60 readings/minute)Ramp functionsSource functionsVoltage, current, resistance, frequency, temperatureRate4 steps/secondTrip detectContinuity or voltage (continuity detection not available when sourcing current)Loop power functionVoltageSelectable, 26 VAccuracy10%, 18 V minimum at 22 mAMaximum current25 mA, short circuit protectedMaximum input voltage50 V DCStep functionsSource functionsVoltage, current, resistance, frequency, temperatureManual stepSelectable step, change with arrow buttonsAutostepFully programmable for function, start delay, stepvalue, time per step, repeatEnvironmental SpecificationsOperating temperature-10°C to +50°CStorage temperature-20°C to +60°CDust/water resistanceMeets IP52, IEC 529Operating altitude3000 m above mean sea level (9842 ft)Safety SpecificationsAgency approvalsCAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993Mechanical and General SpecificationsSize136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in)Weight1.2 kg (2.7 lb)BatteriesInternal Battery Pack Li-ion: 7.2V,4400mAh, 30 WhBattery life>8 hours typicalBattery replacementReplace without opening calibrator; no tools requiredSide port connectionsPressure module connectorUSB Connector to interface to your PCDigital instrument (HART) connectorConnection for optional battery charger/eliminatorData storage capacity1 week of calibration procedures results90 day specificationsThe standard specification interval for the 750 Seriesare 1 and 2 years.Typical 90 day measurement and source accuracy can be estimated by dividing the one year “% of reading” or “% of output” specifications by 2.Floor specifications, expressed as “% of full scale” or “counts” or “ohms” remain constant.Temperature, Resistance Temperature DetectorsDegrees or % of reading – Type (α)Range °CMeasure °C1 1 year2 year100 Ω Pt (385)-200 to 100
100 to 8000.07°C
0.02% + 0.05°C0.14°C
0.04% + 0.10°C200 Ω Pt (385)-200 to 100
100 to 6300.07°C
0.02% + 0.05°C0.14°C
0.04% + 0.10°C500 Ω Pt (385)-200 to 100
100 to 6300.07°C
0.02% + 0.05°C0.14°C
0.04% + 0.10°C1000 Ω Pt (385)-200 to 100
100 to 6300.07°C
0.02% + 0.05°C0.14°C
0.04% + 0.10°C100 Ω Pt (3916)-200 to 100
100 to 6300.07°C
0.02% + 0.05°C0.14°C
0.04% + 0.10°C100 Ω Pt (3926)-200 to 100
100 to 6300.08°C
0.02% + 0.06°C0.16°C
0.04% + 0.12°C10 Ω Cu (427)-100 to 2600.2°C0.4°C120 Ω Ni (672)-80 to 2600.1°C0.2°CSource currentSource °CAllowable current2 1 year2 year 1 mA0.05°C
0.0125% + 0.04°C0.10°C
0.025% + 0.08°C0.1 mA to 10 mA500 μA0.06°C
0.017% + 0.05°C0.12°C
0.034% + 0.10°C0.1 mA to 1 mA250 μA0.06°C
0.017% + 0.05°C0.12°C
0.034% + 0.10°C0.1 mA to 1 mA150 μA0.06 C
0.017% + 0.05°C0.12 C
0.034% + 0.10°C0.1 mA to 1 mA1 mA0.05°C
0.0125% + 0.04°C0.10°C
0.025% + 0.08°C0.1 mA to 10 mA1 mA0.05°C
0.0125% + 0.04°C0.10°C
0.025% + 0.08°C0.1 mA to 10 mA3 mA0.2°C0.4°C0.1 mA to 10 mA1 mA0.04°C0.08°C0.1 mA to 10 mA1. For two and three-wire RTD measurements, add 0.4°C to the specifications.
2. Supports pulsed transmitters and PLCs with pulse times as short as 1 msTemperature, ThermocouplesTypeSource °CMeasure °CSource °C  1 year2 years1 year2 yearsE-250 to -2001.32.00.60.9-200 to -1000.50.80.30.4-100 to 6000.30.40.30.4600 to 10000.40.60.20.3N-200 to -1001.01.50.60.9-100 to 9000.50.80.50.8900 to 13000.60.90.30.4J-210 to -1000.60.90.30.4-100 to 8000.30.40.20.3800 to 12000.50.80.30.3K-200 to -1000.71.00.40.6-100 to 4000.30.40.30.4400 to 12000.50.80.30.41200 to 13720.71.00.30.4T-250 to -2001.72.50.91.4-200 to 00.60.90.40.60 to 4000.30.40.30.4B600 to 8001.32.01.01.5800 to 10001.01.50.81.21000 to 18200.91.30.81.2R-20 to 02.32.81.21.80 to 1001.52.21.11.7100 to 17671.01.50.91.4S-20 to 02.32.81.21.80 to 2001.52.11.11.7200 to 14000.91.40.91.41400 to 17671.11.71.01.5C0 to 8000.60.90.60.9800 to 12000.81.20.71.01200 to 18001.11.60.91.41800 to 23162.03.01.32.0L-200 to -1000.60.90.30.4-100 to 8000.30.40.20.3800 to 9000.50.80.20.3U-200 to 00.60.90.40.60 to 6000.30.40.30.4BP0 to 10001.01.50.40.61000 to 20001.62.40.60.92000 to 25002.03.00.81.2XK-200 to 3000.20.30.20.5300 to 8000.40.60.30.6

There are no reviews yet.

Be the first to review “FLUKE 754 HART DOCUMENTING PROCESS CALIBRATOR”

Your email address will not be published. Required fields are marked *