Tsurumi BER | 3-PHASE / 50Hz
This submersible ejector is composed of a B type pump and a venturi with diffusor trumpet.
- øDischarge bore : 25 – 50
- Power output kW : 0,75 – 5,5
- Poles : 2 • 4
- Impeller : Canal
- Motor protector (built-in)
- Guide rail fitting
Description
Reviews (0)
Material
| ø Air inlet | 25mm, 32mm, 50mm | |||
|---|---|---|---|---|
| Pumping Fluid | Type of Fluid | Municipal sewage, sewage of food industry | ||
| Temperature | 0-40°C | |||
| Pump | Components | Impeller | Non-clog impeller | |
| Shaft Seal | Double mechanical seal | |||
| Bearings | Shielded ball bearings | |||
| Material | Impeller | Grey iron casting EN-GJL-200 | ||
| Casing | Grey iron casting EN-GJL-200 | |||
| Suction Plate | Grey iron casting EN-GJL-200 | |||
| Diffuser | Construction steel DIN1.0040 nylon coated | |||
| Shaft Seal | Silicon carbide in oil bath | |||
| Motor | Motor Protector (built-in) | Circle thermal cut-out | ||
| Phase / Voltage | 3-phase / 400V / 50Hz / d.o.l. | |||
| Lubrication | Turbine oil (ISO VG32) | |||
| Type, Poles | Induction motor, 2 poles, IP68, Induction motor, 4 poles, IP68 | |||
| Insulation | Insulation class E, Insulation class F | |||
| Material | Casing | Grey iron casting EN-GJL-150 | ||
| Shaft | Stainless steel EN-X6Cr13, Stainless steel EN-X30Cr13 | |||
| Cable | Rubber, NSSHÖU | |||
| Air pipe connection | Inside thread, flange | |||
Reviews
There are no reviews yet