The post ABB 4-pole M mini contactors appeared first on Adex.
]]>
- High performances even when installed side by side
- Wide set of coils available
- Up to 6 auxiliary contacts can be mounted
- Fast operation
Main features
- Up to 5,5 kW – 400 V AC-3, 7,5 hp – 480V, 20 A – 400 V AC-1 and 20 A (600 V AC) – general use
- 2 terminal types available: screw terminal, specific screw terminals for ring tongue ferrules
- Standard DC versions with extended operating limits coils
- Complete range of accessories including front or side mounting auxiliary contact blocks, surge suppressors, and electronic timers
The post ABB 4-pole M mini contactors appeared first on Adex.
]]>The post ABB AF 3-pole contactors appeared first on Adex.
]]>- Optimize logistics and cut administration costs with fewer product variants to handle
- Access global support and use the same products in all parts of the world: the 100 … 250 V AC/DC coil covers all standard network voltages
- Push-in Spring terminals offer only one push for extremely fast wiring: faster than ever installation, easier than ever wiring, reliable as ever connections
- A reduction of the coil’s energy consumption by 80% lets you save energy
- Secure your uptime by letting the AF technology overbridge voltage drops and sags.
Main features
- Up to 560 kW – 400 V AC-3, 900 hp – 480 V and 2850 A – 690 V AC-1, 2850 A – general use
- Only 4 coils cover 24 V – 500 V AC and 20 V – 500 V DC
- Dedicated 24 V DC coil for direct control by PLC-output > 250 mA, low holding consumption up to 1.7 W.
- Screw, Push-in Spring and ring tongue connection types
- Built-in surge suppression
- Connection sets and interlock unit for reversing and star-delta starter for an easy, fast and secure assembly of starters
- Mirror and mechanically linked contacts.
The post ABB AF 3-pole contactors appeared first on Adex.
]]>The post ABB Contactors for capacitor switching appeared first on Adex.
]]>
Product Features
- RA contactors, with damping resistors, are used when peak currents far exceed 100 times the nominal rms current
- UA contactors are used when peak currents are less or equal to 100 times the nominal rms current
- RA with wide control voltage range available, thanks to AF technology and electronic coil.
The post ABB Contactors for capacitor switching appeared first on Adex.
]]>The post ABB Contactors for DC switching appeared first on Adex.
]]>- Compact and modern design
- IEC and UL-approved
- Access global support and use the same products in all parts of the world
- Reliable in all networks.
Product Features
- Up to 1050 A, 1500 V DC-PV3 for PV solar power application.
- Up to 2050 A, 1000 V DC-1
- GF and GAF are based on the well-proven AF technology
- Wide control voltage range (e.g. 100-250 V AC/DC)
- PLC interface, 24 V DC – 100 mA
The post ABB Contactors for DC switching appeared first on Adex.
]]>The post ABB AFS contactors for safety applications appeared first on Adex.
]]>
- Complying with main safety standards EN ISO 13849 and EN 62061 guaranteeing the safe use of machinery and equipment
- Contactors status guaranteed with factory-mounted auxiliary contact blocks
- Easy safety chain identification with the yellow housing
- Simplify calculation of installation safety level with safety values available in FSDT and Sistema tools
Main features
- Up to 400 kW – 400 V AC-3, 600 hp – 480 V and 1050 A – 690 V AC-1, 900 A – general use.
- B10d values available for the entire range
- Fast opening times as low as 20 MS for certain AFS contactors with PLC interface
- Mirror and mechanically linked contacts with 3rd party certificate
- Low energy auxiliary contacts feature a minimum switching capacity of 12V, 3 mA 10-7
- Built-in surge suppression
The post ABB AFS contactors for safety applications appeared first on Adex.
]]>The post ABB 4-pole B mini contactors appeared first on Adex.
]]>Main benefits
- Flattest mini contactor on the market
- No noise in operation thanks to the hum free coil
- Energy and cost saving
- Flexible use in any position.
Main features
- Up to 20 A, 690 V AC-1 and 16 A, 600 V general use
- 3 connection types available: screw, soldering pins & flat pins
- Special version with 1.4 W coil consumption for direct connection to PLC
Integrated protective circuit with diodes and an additional surge suppressor
The post ABB 4-pole B mini contactors appeared first on Adex.
]]>The post ABB Thermal overload relay appeared first on Adex.
]]>- Reliable protection for motors in the event of overload or phase failure
- Easy creation of individual motor starting solutions
- Perfect fit to ABB’s contactors: directly mounted and connected without further wiring
- Single mounting kits and accessories for remote control available for specific applications
- Selectable automatic reset mode allows to reduce downtimes and travelling costs
- In combination with ABB mini contactors, the installation in narrow spaces is possible
- Rated for AC and DC loads
Main features
- Trip class 10/10A
- Adjustable current setting ranges
- Overload protection with phase loss sensitivity
- Temperature compensation up to +70°C
- Selection between automatic or manual reset mode
- Stop and test function
- Finger safe housing (IP20)
- Large markings on the setting scale for precise setting
- Suitable for 1-phase applications
The post ABB Thermal overload relay appeared first on Adex.
]]>The post ABB AF 4-pole contactors appeared first on Adex.
]]>Main benefits
- Optimize logistics and cut administration costs with fewer product variants to handle
- Access global support and use the same products in all parts of the world
- A reduction of the coil’s energy consumption by 80% lets you save energy
- Secure your uptime by letting the AF technology overbridge voltage drops and sags.
Main features
- Up to 1000 A, 690 V AC-1 and 540 A, 600 V general use
- Only 4 coils cover 24 V – 500 V AC and 20 V – 500 V DC
- Built-in surge suppression
- Mirror and mechanically linked contacts
- Easy-to-use accessories through snap-to-connect function.
The post ABB AF 4-pole contactors appeared first on Adex.
]]>The post ABB AS 3-pole contactors appeared first on Adex.
]]>Main benefits
- Right performances at the right price
- Same dimensions in depth, width and height throughout the range in AC or DC control and for screw and spring terminals
- Reversing contactors in 90 mm width including mechanical and electrical interlocking without additional width
- Easy, fast and secure assembly of starters thanks to connection sets for direct-on-line, reversing and star-delta starters.
Main features
- Up to 7,5 kW – 400 V AC-3, 10 hp – 480 V and 24 V – AC-1, 20 V – general use
- Screw and spring connection types
- Direct control by PLC removing any use of interface relay and reducing panel power consumption
- Side clipped-on surge suppressors, integrated into overall contactor dimensions
- Mirror and mechanically linked contacts.
The post ABB AS 3-pole contactors appeared first on Adex.
]]>