NITTO SEIKO Archives - Adex https://adexuae.com/product-category/flow-meters/nitto-seiko/ Adex International Tue, 09 Sep 2025 19:40:32 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://adexuae.com/wp-content/uploads/2023/10/cropped-Adex-logo-2.jpg-32x32.jpg NITTO SEIKO Archives - Adex https://adexuae.com/product-category/flow-meters/nitto-seiko/ 32 32 Nitto Seiko Ultrasonic Flow Meter https://adexuae.com/shop/nitto-seiko-ultrasonic-flow-meter/ https://adexuae.com/shop/nitto-seiko-ultrasonic-flow-meter/#respond Tue, 09 Sep 2025 19:24:06 +0000 https://adexuae.com/?post_type=product&p=35510 This is an ultrasonic flow meter of the clamp-on variety that can gauge liquid flow outside of a conduit.

This flow metre uses the propagation time difference method, whose ultrasonic propagation time differs depending on the rate of liquid flow in a pipe.

Due to the ability to measure from outside of a pipe, it is possible to measure various types of liquid without worrying about corrosion.

We have hand-held types that are appropriate for examining and inspecting the flow of various places in addition to wall-mount types that are stable for permanent standing.

The post Nitto Seiko Ultrasonic Flow Meter appeared first on Adex.

]]>
  • It is available for installing to the current pipe-line.
  • This can show installation
  • This is completely non-wetted type, and it does not influence from pressure and conductivity of measured
  • It is available for applying to small size piping by changing
  • This is easy operation with large ten-key
  • Small size and light weight hand held type makes convenience to
  • Hand held type has chargeable battery of which 10 hours

    • For transducer

    Article Contents
    Measured liquid Homogeneity liquid of which ultrasonic can propagate.

    (Water, Sea water, Industrial water, Acid, Alkali, Alcohol, etc)
    Turbidity 10,000ppm or less
    LiquidTemp. -30～+90℃ (Same as ambient Temp. of transducer)
    Nominal size 15～600mm (HS0：15～100mm, HM0：50～600mm)
    Material of pipe and lining Pipe shall be penetrated material by ultrasonic such as Copper, Stainless, PVC, Ductile iron.

    Lining must adhere to original pipe.

    (Lining material: Tar-epoxy, Mortar, Rubber, etc.)
    Flow rate range 0～±10m/s
    Nos. of traverse line 1 line
    Method Propagation time difference by ultrasonic pulse
    Accuracy

    （Calibrated accuracy at factory）

    		 ±2.0% of indicated value (In case of less than 2m/s of flow rate, accuracy is ±0.04m/s)

    Note) It is required the pipe filled with liquid, and ideal velocity distribution. Note) It is required longer straight pipe than specified.
    Protection level IP67
    Length of code 5m as standard. (Please inquiry in case more length is required)

    For transmitter

      Article Contents  
    Component Wall mount type Hand held type
    Power For AC： 100～220V AC±10% 50/60Hz

    For DC： 24V DC±10%

    		 100～220V AC±10% 50/60Hz

    10 Hrs operation is available at full charge.
    Power consumption 1.5W or less 2W or less
    Ambient Temp. -10～+60℃ （Humidity 85% or less）
    Atomosphere Avoid direct sunshine, radiant heat, corrosive environment, and explosive atomosphere
     

    Analog output

    		 Kind of signal 4～20mADC  
    Converted Precision 0.1%
    Arrowable load

    resistance

    		 750Ω以下
     

    Open collector output

    		 Setting frequency 1～9,999Hz
    Current-V oltage DC80Ｖ、100mA or less
    Voltage at ON 1V or less
    Relay output “Without”, “Excessive flow”, “Back flow alarm” etc.
    Communication RS485 serial port RS232C serial port
    Indication LCD (20 digits × 2 line), back light

    Momentary flow rate, integrated flow volume, etc

    		 LCD (16 digits × 4 line), back light

    Momentary flow rate, integrated flow volume, etc

    The post Nitto Seiko Ultrasonic Flow Meter appeared first on Adex.

    ]]>     https://adexuae.com/shop/nitto-seiko-ultrasonic-flow-meter/feed/ 0     Nitto Seiko Food Flow Meter https://adexuae.com/shop/nitto-seiko-food-flow-meter/ https://adexuae.com/shop/nitto-seiko-food-flow-meter/#respond Tue, 09 Sep 2025 19:24:02 +0000 https://adexuae.com/?post_type=product&p=35509 The ability of the flow metre for food to be disassembled, cleaned, and sterilised for sanitation purposes is crucial. This flow metre is of the rotary piston kind, which is frequently utilised as a flow metre for food. It is highly accurate and has a clean structure.

    The post Nitto Seiko Food Flow Meter appeared first on Adex.

    ]]>
  • Its structure makes easy to disassemble, to wash, and to
  • It is hard to stay the liquid inside due to its less pocket
  • Using stainless steel for main body and measuring chamber, and ultra- glossy finishing for the sanitary
  • Special plastic rotor is higher strength
  • Available for selecting the counting unit from several kind depend on the application
  • Available for using measurement and control of various kind of edible liquid

    • Specifications of measuring unit

    Nominal size symbol 025 040 050 065 080
    Measured fluid Food liquids
    Nominal size 25A 40A 50A 65A 80A
    Liquid viscosity 1～500 mPa･s (Special 1～30,000 mPa･s)
    Liquid temperature 0～80℃
    Liquid pressure 0.5MPa or under
    Measuring accuracy Within ±0.5%
     

    Standard connection

    		 IDF/ISO connection    Ferrule，Screw
    1S 11/2S 2S 21/2S 3S
     

    Material

    		 Main body:SCS13，SCS14，Rotor:PPS，GC
    SCS13，SCS14:Stainless steel casting， PPS: Special plastic， GC: Carbon

     

    Specifications of counter unit

    Nominal size symbol 025 040 050 065 080
     

    Types

    		 Pointer    type（A0），Zero resettable register    type（Z8），

    Large-size drum counter type（V0），Printer zero resettable register type（P0），Electronic type（E0）
    Indication  

    Pointer type (A0)

    		 Pointer Dial plate Dial unit 0.1 L 1 L
    Volume per rev. 10 L 100 L
    Total counter Dial unit 10 L 100 L
    Number of digits 6 ( 999,999 x 10L ) 6 ( 999,999 x 100L )
    Zero resettable register type

    (Z8)

    		 Zero-reset counter Dial unit 0.1 L 1 L
    Number of digits 4 ( 9,999 L ) 4 ( 9,999 x 10L )
    Continuous total counter Dial unit 1 L 10 L
    Number of digits 7 ( 9,999,999 L ) 7 ( 9,999,999 x 10L )
    Large-size drum counter type

    (V0)

    		 Zero-reset counter Dial unit － 1 L
    Number of digits － 5    ( 99,999 L )
    Continuous total counter Dial unit － 1 L
    Number of digits － 8    ( 99,999,999 L )
    Printer zero resettable register type

    (P0)

    		 Zero-reset counter Dial unit － 1 L
    Number of digits － 5    ( 99,999 L )
    Continuous total counter Dial unit － 1 L
    Number of digits － 8    ( 99,999,999 L )
    Electronic type (E0) Un totalized
    Nominal size symbol 025 040 050 065 080
    Output  

     

     

     

     

     

     

    Pulse output

    		  

    Unit pulse (A0,Z8,V0, P0)

    		  

    Type of signal

    		 (Note) Either one of (1) voltage no-contact signal (high frequency type, photoelectric type), or (2) reed switch contact signal.
     

    Output unit

    		 No-contact pulse output： See “No-contact pulse output” table.
    Contact pulse output： See “Contact pulse output” table.
     

     

     

     

    Unitless pulse (E0)

    		  

     

     

    Type of signal

    		 Voltage no-contact output or open collector output Voltage no-contact：

    Signal level H: Approx. equal to voltage of

    external power (at no load) L:0.5V or less (at no load)

    Output resistance : Approx. 2.3kΩ

    Amplifier box FSES is including.

    		  

    Open collector：

    Voltage & current：27V DC, 30mA Voltage at ON：0.5V or less
    Cable between the flowmeter – amplifier box. Length:3m    
    Unit ※1 21.8mL 46.0mL 123.8mL 123.8mL 275.5mL
    Pulse width Approx. 3.5msec
    Analogue output Direct output impossible (DA converter required outside)
     

     

    Power source

    		 Unit pulse (A0,Z8,V0,P0) The following external power sources are required, for outputting voltage no-contact signals:

    (1)  High frequency type pulse generator: 6～26.4VDC , 23mA(at 24V DC) ,17 mA(at 12V DC)

    (2)  Photoelectric type pulse generator: 12VDC, 50mA
    Unitless pulse

    (E0)

    		 Voltage no-contact： DC12～24V 、 20mA(at 24V DC) 25mA(at 12V DC) Open collector： DC12～24V、12mA
    Ambient temperature -10～60℃
    Material Aluminum die casting

    Electric counter (Type E0) has only signal output part.

    ※1 Output pulse unit of unitless pulse shows nominal value output from this meter.

    Output pulse unit table (Optional)

    No-contact output pulse unit table (● Photoelectric type, ○: High frequency type,

    Nominal size symbol One rev. of pointer Pulse unit
    1mL/P 10mL/P 100mL/P 1L/P 10L/P 100L/P
    ０２５ 10L ● ○ ○ ○ ― ―
    ０４０ 10L ― ● ○ ○ ― ―
    ０５０ 100L ― ● ○ ○ ○ ―
    ０６５ 100L ― ● ○ ○ ○ ―
    ０８０ 100L ― ● ○ ○ ○ ―

     

    Contact output pulse unit table (○:Reed switch)

    Nominal size symbol One rev. of pointer Pulse unit
    1mL/P 10mL/P 100mL/P 1L/P 10L/P 100L/P
    ０２５ 10L ― ― ― ○ ○ ―
    ０４０ 10L ― ― ― ○ ○ ―
    ０５０ 100L ― ― ― ― ○ ○
    ０６５ 100L ― ― ― ― ○ ○
    ０８０ 100L ― ― ― ― ○ ○

     

    Pointer type(Ａ０)、Zero resettable register type(Ｚ８)、Electronic type（E0）

    Nominal size symbol Working conditions 1mPa・s～ 4mPa・s～ 10mPa・s～ 50～500mPa・s
    ０２５ Continuous 500 ～ 2,500 350 ～ 3,500 200 ～ 3,500 170 ～ 3,500
    Intermitten 500 ～ 3,500 350 ～ 5,000 200 ～ 5,000 170 ～ 5,000
    ０４０ Continuous 1,200 ～ 6,000 650 ～ 8,400 500 ～ 8,400 360 ～ 8,400
    Intermitten 1,200 ～ 8,500 650 ～ 12,000 500 ～ 12,000 360 ～ 12,000
    ０５０ Continuous 2,400 ～ 12,000 1,200 ～ 17,000 1,000 ～ 17,000 750 ～ 17,000
    Intermitten 2,400 ～ 17,000 1,200 ～ 24,000 1,000 ～ 24,000 750 ～ 24,000
    ０６５ Continuous 2,400 ～ 12,000 1,200 ～ 17,000 1,000 ～ 17,000 750 ～ 17,000
    Intermitten 2,400 ～ 17,000 1,200 ～ 24,000 1,000 ～ 24,000 750 ～ 24,000
    ０８０ Continuous 5,000 ～ 25,000 2,500 ～ 35,000 2,000 ～ 35,000 1,500 ～ 35,000
    Intermitten 5,000 ～ 35,000 2,500 ～ 50,000 2,000 ～ 50,000 1,500 ～ 50,000

    Large-size drum counter type（V0）

    Nominal size symbol Working conditions 1mPa・s～ 4mPa・s～ 10mPa・s～ 50～500mPa・s
    ０４０ Continuous 1,800 ～ 6,000 1,600 ～ 8,400 1,200 ～ 8,400 900 ～ 8,400
    Intermitten 1,800 ～ 8,500 1,600 ～ 10,000 1,200 ～ 10,000 900 ～ 10,000
    ０５０ Continuous 3,600 ～ 12,000 3,200 ～ 17,000 2,400 ～ 17,000 1,800 ～ 17,000
    Intermitten 3,600 ～ 17,000 3,200 ～ 20,000 2,400 ～ 20,000 1,800 ～ 20,000
    ０６５ Continuous 3,600 ～ 12,000 3,200 ～ 17,000 2,400 ～ 17,000 1,800 ～ 17,000
    Intermitten 3,600 ～ 17,000 3,200 ～ 20,000 2,400 ～ 20,000 1,800 ～ 20,000
    ０８０ Continuous 8,000 ～ 25,000 6,400 ～ 35,000 4,800 ～ 35,000 3,600 ～ 35,000
    Intermitten 8,000 ～ 35,000 6,400 ～ 40,000 4,800 ～ 40,000 3,600 ～ 40,000

    Printer zero resettable register type（P0）

    Nominal size symbol Working conditions 1mPa・s～ 4mPa・s～ 10mPa・s～ 50～500mPa・s
    ０４０ Continuous 3,600 ～ 6,000 3,200 ～ 8,400 2,400 ～ 8,400 1,800 ～ 8,400
    Intermitten 3,600 ～ 8,500 3,200 ～ 10,000 2,400 ～ 10,000 1,800 ～ 10,000
    ０５０ Continuous 7,200 ～ 12,000 6,400 ～ 17,000 4,800 ～ 17,000 3,600 ～ 17,000
    Intermitten 7,200 ～ 17,000 6,400 ～ 20,000 4,800 ～ 20,000 3,600 ～ 20,000
    ０６５ Continuous 7,200 ～ 12,000 6,400 ～ 17,000 4,800 ～ 17,000 3,600 ～ 17,000
    Intermitten 7,200 ～ 17,000 6,400 ～ 20,000 4,800 ～ 20,000 3,600 ～ 20,000
    ０８０ Continuous 16,000 ～ 25,000 13,000 ～ 35,000 9,600 ～ 35,000 7,200 ～ 35,000
    Intermitten 16,000 ～ 35,000 13,000 ～ 40,000 9,600 ～ 40,000 7,200 ～ 40,000

    (Note) 1. “Continuous” refers to a case where the daily operating time exceeds 8 hours, while “Intermittent” expresses a case where the daily operating time is no more than 8 hours.

    Nominal size symbol Flow rate 100％
    ０２５ 5,000L/h
    ０４０ 12,000L/h
    ０５０

    ０６５

    		 24,000L/h
    ０８０ 50,000Lh

     

    Nominal size symbol IDF/ISO
    Ferrule Screw
    ０２５ 190 190
    ０４０ 210 210
    ０５０ 270 270
    ０６５ 270 270
    ０８０ 340 340

    The post Nitto Seiko Food Flow Meter appeared first on Adex.

    ]]>     https://adexuae.com/shop/nitto-seiko-food-flow-meter/feed/ 0     Nitto Seiko Mass Flow Meter https://adexuae.com/shop/nitto-seiko-mass-flow-meter/ https://adexuae.com/shop/nitto-seiko-mass-flow-meter/#respond Tue, 09 Sep 2025 19:24:00 +0000 https://adexuae.com/?post_type=product&p=35508 A mass flow metre called CLEAN FLOW achieves great performance and high dependability. By sensing the phase difference created by Coriolis in the measuring tube, it is able to measure mass flow directly. An easy-to-use capacitance touch panel is a feature of the high-functioning transmitter. A variety of indication articles can be put on the three LCD lines.

    The post Nitto Seiko Mass Flow Meter appeared first on Adex.

    ]]>
  • It can measure mass flow directly, it is not affected temperature, pressure, viscosity, density, or flow distribution due to its measurement
  • Compact design
  • It does not need special fixture. Easy
  • New type measuring tube realizes low pressure
  • Various indication article by 3 line
  • Good visibility by Buck-light
  • Plug-in card can add out/input easily. (Option)

    • Sensor

    Size 015 025 050 080 100 150
    Nominal diameter 10A, 15A, 20A, 25A, 40A, 50A, 65A, 80A, 100A, 150A, 200A
     

    Connection end

    		 JIS10K, 20K

    ASME/ANSI 150, 300, 600 JPI 150, 300, 600

    DIN PN16, 40, 63 Tri-clamp
    Fluid Liquid/Gas
    Flow range 0 ～ 860,000 Kg/h (6 type)
    Accuracy  

     

    Volume

    		  

    Liquid

    		 General:                               Mass flow                             ±0.4%

    Volume flow                         ±0.4%

    High accuracy:                    Mass flow                            ±0.15% (±0.1%option)

    Volume flow                         ±0.15%
    Gas General:                               Mass flow                            ±1.0%

    High accuracy:                    Mass flow                            ±0.5%
    Density Liquid General:                               0.010kg/L

    High accuracy:                    0.002kg/L (0.001kg/L option)
     

    Temperature

    		 General:                               -50 ～ 160 ℃

    High accuracy:                    -50 ～ 205 ℃

    Explosion-proof type is depending on the specification
    Pressure Depending on the connection end
    Wetted parts material Stainless steel (Standard), Alloy C (Option)
    Explosion-proof ATEX / IECEx, cFMus,

    TIIS (Applying)

    Transmitter

    Power 100 ～ 240V AC, 50/60Hz

    11 ～ 30V DC
    Power consumption 20W
    Protection level Unit type     : IP65 / IP67, NEMA 4X

    Remote type: IP65 / IP67 / IP68 (Sensor only, Immersion depth 5m), NEMA 4X
    Housing material Aluminum

    Stainless (Remote type: Option)
     

    Output signal

    		 Analog: 4-20mA DC (Active mode or Passive mode)

    Digital: 2 points (Pulse or switch) (Passive mode) HART (Protocol Ver. 7.1)
    Dumping 0.8 sec. (Avilable setting 0.2 ～100 sec)
    Low cut-off 1% of Max. flow rate. (Available setting 0～5%)
    Transmission distance Max. 200m (Remote type)

     

    Liquid mesurement

    Size 015 025 050 080 100 150
    Flow range MASS flow[kg/h] 0～8,000 0～35,000 0～90,000 0～250,000 0.～560,000 0～860,000
    Volume flow [L/h]（※1） 0～8,000 0～35,000 0～90,000 0～250,000 0.～560,000 0～860,000
    （※1）Volume flow is according to the 1g/mL of density. In case of other than 1mg/mL Volume flow = Mass flow / Density.
    Zero-stability [kg/h] 0.64 2.16 7.2 20 41.6 68.8

    Basic accuracy

    Model 430 (General type) 450 (High accuracy type)
     

     

    Mass flow (Liquid)

    		 ±0.4％

    ±0.25％ (Option)

    ±0.20% (Option)

    		 ±0.15％

    ±0.10％ (Option)
    Mass flow (Gas) ±1.0％ ±0.5％
     

     

    Volume flow

    		 ±0.4％

    ±0.25％ (Option)

    ±0.20% (Option)

    		 ±0.15％
    Repeatibility (volume) Refer to below table
     

    Density (Liquid)

    		 0.010kg/L 0.002kg/L

    0.001kg/L
     

    Repeatibility (density)

    		 0.002kg/L 0.002kg/L

    0.001kg/L

    Measuring accuracy

      Max. measuring accuracy Repeatability
     

    1

    		  

    ±General accuracy

    		  

    ±1/2×General accuracy
     

    2

    		  

    ±（Zero-stability/Measured value）×100％

    		  

    ±1/2×（Zero-stability/Measured value）×100％

    In accordance with EN 60529：IP65/IP67, NEMA4X

    • Vibration

    In accordance with EN 60068-2

    10～58Hz, Max deflection 0.15mm（Peak load） 58～150Hz, Max. acceleration 2G（Peak load）

    • Ambient temperature

    Standard：-20～70℃ Option：-40～70℃

    Note) When operating below -20℃, visibility of the LCD display may be worse.

    • Signal cable (Remote type: between sensor and transmitter) Impedance 100～200Ω

    Withstand voltage 120V Outer diameter 6～12mm

    Cable design 4 core shielded cable (2 wire pairs as a star-quad cable) Max. signal cable length

    0.25mm2 ： 50m
    0.34mm2 ： 100m
    0.50mm2 ： 150m
    0.75mm2 ： 200m

    Power

    AC Power Terminal

    Operating voltage Power consumption

    		 ：

    ：

    ：

    		 L／N

    100～240VAC 50/60Hz

    20VA
    DC Power Terminal ： 1+／2-
    Operating voltage ： 11～30VDC
    Power consumption ： 20W

    Output

    Standard output

    Current output

    Current output Active mode Passive mode
    Terminal Uco(+)／32(-) 31(+)／32(-)
    Output signal 4～20mADCor4～12～20mADC Switchable 4～20mADC
    Load resistance 250～300Ω 250～600Ω
    Source voltage － 12～30V
    Measuring error 0.1% or less of measured value

    Digital output

    Digital output Pulse/frequency output (passive) Binary output (passive)
    Terminal 41(+)／42(-)、51(+)／52(-) 41(+)／42(-)、51(+)／52(-)
    Output “closed” Voltage 3VDC or less 2.5kHz or less：2～30mA

    More than 2.5kHz：10～30mA

    		 Voltage 3VDC or less 2～30mA
    Output “open” Voltage 16～30VDC 0.2mA or less Voltage 16～30VDC 0.2mA or less
    Max. frequency 10.5kHz －
    Pulse width 0.1～2,000ms －

    Option output

    Option (by plug-in card)

    Passive current output (red)

    Terminal V1(+)／V2(-)、V3(+)／V4(-) The plug-in card can be used in slot OC1 or OC2
    Output signal 4～20mA
    Load resistance 250～600Ω
    Source voltage 12～30VDC
    Measuring error 0.1% or less of measured value

    Digital output (green): Binary output (Passive)

    Terminal V1／V2、V3／V4 The plug-in card can be used in slot OC1 or OC2
    Output “closed” Voltage 3VDC or less 2～30mA
    Output “open” Voltage 16～30VDC 0.2mA or less

    Digital input (Yellow)

    Terminal V1(+)／V2(-)、V3(+)／V4(-) The plug-in card can be used in slot OC1 or OC2
    Input “ON” Voltage 16V～30VDC
    Input “OFF” Voltage 3VDC or less
    Internal resistance 6.5kΩ

    24VDC Power supply (blue)

    Terminal V1(+)／V2(-) The plug-in card can be used in slot OC1 only.
    Function For active connection of passive outputs
    Output voltage 24VDC at 0mA 17VDC at 25mA
    Load rating 25mA, permanently short

    circuit-proof

    The possible combination of plug-in cards

    Output code Additional output code Slot OC1 Terminals V1 / V2 Slot OC2 Terminals V3 / V4
    Output 1 Output 2
    G0 — — — —
    G1 × — 24 V DC power supply (blue) —
    G2 — × — Passive current output, 4～20 mA (red)
    G3 × × Passive current output, 4～20 mA (red) Passive current output, 4～20 mA (red)
    G0 DRT DSN 24 V DC power supply (blue) Passive digital input (yellow)
    G0 DRT DSG 24 V DC power supply (blue) Passive digital output (green)
    G0 DRT DSA 24 V DC power supply (blue) Passive current output, 4～20 mA (red)
    G0 DRN — Passive digital input (yellow) —
    G0 DRN DSG Passive digital input (yellow) Passive digital output (green)
    G0 DRN DSA Passive digital input (yellow) Passive current output, 4～20 mA (red)
    G0 DRG DSN Passive digital output (green) Passive digital input (yellow)
    G0 DRG DSA Passive digital output (green) Passive current output, 4～20 mA (red)
    • Indication contents

    Mass flow, Volume flow, Density, Temperature, and any others (Available for select).

    4 kind of monitor for operator can be set, and it can indicate several measuring result simultaneously. Indicator has 3 line LCD, and variety of indication is available.

    • Operation

    Operated by capacitance touch panel through the glass is available. Set according to the menu by 4 operation keys.

    • Standard output

    Analog output: 1 point (4～20mADC/HART7） Digital output: 2 points (Pulse, frequency)

    • Optional plug-in cards (for additional output)

    The transmitter has two slots in which plug-in cards can be inserted to provide additional inputs and outputs.

    The slots are located on the transmitter motherboard and can be accessed after removing the front housing cover.

    The post Nitto Seiko Mass Flow Meter appeared first on Adex.

    ]]>     https://adexuae.com/shop/nitto-seiko-mass-flow-meter/feed/ 0     NITTO SEIKO Turbine Flow Meter (K Series) https://adexuae.com/shop/nitto-seiko-turbine-flow-meter-k-series/ https://adexuae.com/shop/nitto-seiko-turbine-flow-meter-k-series/#respond Tue, 09 Sep 2025 19:23:58 +0000 https://adexuae.com/?post_type=product&p=35507
  • Excellent durability and stability with special materials adopted from main bearing.
  • Also usable for liquids containing a lot of foreign matters and liquids with large fluctuations in pressure or flow rate
  • Can be mounted in any position on the piping, such as vertical, horizontal and inclined positions
  • Water-proof indication enables setting on outdoor or pit application
  • Remote indication, remote recording and remote control is available in combination with pulse generator

    • The post NITTO SEIKO Turbine Flow Meter (K Series) appeared first on Adex.

    ]]>

    This is an axial impeller type flow meter with excellent durability and maintainability, boasting a lot of delivery achievements.