The post C.SCOPE SIGNAL GENERATOR SGA4 appeared first on Adex.
]]>The C.Scope SGA4 is an affordable Signal Generator designed for use alongside a CXL4 or DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including street lighting cables.
SIMULTANEOUS DUAL-FREQUENCY
The simultaneous dual-frequency 33kHz and 131kHz signal output of the Signal Generators is ideal for maximising the number of buried services that can be energised and then detected.
The SGA4 Signal Generator can apply the dual frequency signal without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.
THREE SIGNAL APPLICATION TECHNIQUES
The SGA4 offers three alternative ways to apply a Signal Generator signal:
Direct Connection allows specific pipes or cables to be individually traced, identified and their depths measured. The use of Signal Clamps, Signal Injectors and Direct Connection leads make this mode the most effective method for pinpointing pipes and cables.
If it is difficult or inconvenient to use Direct Connection, then the Wraparound technique can be utilised to successfully energise a street or car park lighting cable.
Induction allows the Signal Generator to induce a detectable and traceable signal to previously unknown, undetected or inaccessible underground metal pipes or cables.
HIGH POWER SIGNAL
The fully adjustable One Watt Power Output of the SGA4 means that deeper and less conducting pipes and cables can be effectively energised and then traced over ever longer distances.
It also features a two position power levels so the operator has some control of how much power is in use and when.
PULSED/CONTINUOUS SIGNAL OUTPUT
A Pulsed or Continuous signal output allows operators to switch to the Pulsed Mode at the push of a button in high interference situations and keep on tracing. The SGA4 has a clear audible signal output to indicate when it is in operation.
A useful in-built audio mute control is also included.
ROBUST AND DURABLE CONSTRUCTION
The SGA4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.
ACCESSORY TRAY
The SGA4 Signal Generator has a large detachable accessory tray as its base. It can house not only the standard accessories (Direct Connection Leads, Earth Stake, Connection Magnets, 10m Auxiliary Earth Lead) and the Instruction Manual but also many of the optional extras such as Signal Clamps, Sondes and Signal Injectors.
THREE YEAR WARRANTY
The SGA4 comes with a three year Warranty (conditions apply).
Overview
- One Watt High/Low Power Output
- Simultaneous 33+131kHz Signal
- Pulsed or Continuous Output Signal
- Three Signal Application Techniques:
Direct Connection / Wraparound / Induction - No periodic Calibration required
- In-built Accessory Tray
Specification
Product name
SGA4 Signal Generator
Part No.
SGA4
Controls
All operation is by push button control as follows:
- On/Off
- Power Level: 2 available power levels via High and Low Power buttons
- Pulse/Continuous Output: toggles between pulse or continuous output using one push button
- Audio/Mute: toggles between loud or muted audio output using one push button
Audio Indications
- Audio Feedback on button push
- Audio pitch drops with increasing load current in Connected Mode
- Audio pitch changes with power level in Induced Mode
- Audio output pulses to indicate Pulsed Mode
- Low battery indicated by interrupted Audio and output signal
Output
- Induced = 32.768kHz
- Connected = 131.072kHz and 32.768kHz
- Carrier Pulse Frequency: 7.5Hz (pulsed mode)
Connected Mode
Connection Mode automatically selected when lead is plugged into socket
Maximum Output Voltage (open circuit)
28V rms
Maximum Output Current (short circuit)
65mA rms
Maximum Power
1W into 400Ω load
Construction
- Case moulded from high impact plastic
- Designed to withstand 1m (3’3”) drop onto a hard surface
- Incorporates clip on accessory storage compartment
Weight (including batteries, Connection Leads and Earth Stake)
3.4kg (7 lb 7 oz)
Dimensions (with Accessory Tray fitted)
360mm x 180mm x 230mm (14.1” x 7” x 9”)
Battery Type
Internal 4 x ‘D’ (LR20) cells (either alkaline non-rechargeable or NiMH rechargeable)
Battery Life
up to 40 hours intermittent use at 20ºC (68ºF) using alkaline cells
IP Rating
65
Notes:
Performance figures stated can be affected by site parameters such as ground conditions, temperature, and strong electromagnetic fields. Specification may be subject to change. All C.Scope Signal Generators are in compliance with the essential requirements and other relevant provisions of Council Directive 2014/53/EU (EMC). Compliance has been demonstrated by testing representative samples to the harmonised standards EN300-330 and EN301-489. The essential radio test suites have been carried out and the equipment is in conformity with all applicable directives. All C.Scope Signal Generators comply with the essential requirements and other provisions of Council Directive 2011/65/EU (RoHS).
| Unit Features | SGA4 |
| One Watt Power | • |
| Power Levels | 2 |
| Generator Frequencies: | • |
| – 33+131kHz (Connected at 33+131kHz. Induced at 33kHz only.) | • |
| – 131kHz (Connected and Induced) | – |
| – 33kHz (Connected and Induced) | – |
| – 8kHz (Connected and Induced) | – |
| – 512Hz (Connected) | – |
| – 640Hz (Connected) | – |
| Pulsed / Continuous Output Signal | • |
| Signal Connection Modes: | • |
| – Direct Connection | • |
| – Wraparound | • |
| – Induction | • |
| Automatic Daily Self Test | – |
| Data Logging | – |
| Data Transfer via USB | – |
| High Resolution Backlit Liquid Crystal Display | – |
| No Periodic Calibration* | • |
| Three Year Warranty** | • |
| Batteries*** 4 x D (LR20) Alkaline or NiMH Rechargeable | • |
| In-Built Accessory Tray**** | • |
| IP65 | • |
* No Periodic Calibration. The SGA4 does not require periodic recalibration. C.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal regulations.
** Three Year warranty. Conditions apply.
*** Batteries. 4 x D LR20 Alkaline or NiMH Rechargeable batteries housed in a secure battery compartment.
**** In-Built Accessory Tray includes Direct Connection Lead, Auxiliary 10m Earth Lead, Connection Magnets, Earth Stake and Instruction Manual.
The post C.SCOPE SIGNAL GENERATOR SGA4 appeared first on Adex.
]]>In-built Data Logging, Bluetooth™ connectivity and GPS tracking options.
Designed for use with an SGA4 or SGV4 Signal Generator.
The post C.SCOPE UNDER GROUND CABLE AVOIDANCE TOOL CXL4 CABLE AVOIDANCE TOOL appeared first on Adex.
]]>Description
The CXL4 Cable Avoidance Tools from C.Scope represent a significant advance in cable detecting performance.
Three versions of the CXL4 are available; the standard CXL4, the CXL4-D which has full data logging capability, and the CXL4-DBG which has full data logging capability, Bluetooth
connectivity and GPS.
Innovative new features have been introduced and the popular existing modes of detection have been enhanced to allow the CXL4 Cable Avoidance Tool to successfully detect even the hardest to find pipes and cables. Particular attention has been paid to effect better working practices and to minimise the potential for human error to impact on operating performance.
IMPROVED PERFORMANCE ACROSS ALL FOUR DETECTION MODES
The CXL4 Cable Avoidance Tool has improved performance across all modes of detection; Power, Radio, Generator and AllScan, whilst remaining easy to operate ensuring there is only a minimal need for training or retraining.
SIMULTANEOUS DUAL-FREQUENCY
The simultaneous dual-frequency 33kHz and 131kHz signal output of the Signal Generators is ideal for maximising the number of buried services that can be energised and then detected, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.
OVERLOAD PROTECTION
Optimised Locator Sensitivity and Noise Rejection means that the CXL4 can deal with the highest levels of background interference found, allowing even the weakest of signals to be detected successfully.
INTELLIGENT NEW FEATURES:
ALARM ZONE
AlarmZone alerts operators to the presence of particularly shallow pipes or cables with the exact trigger depth adjustable by the user to best suit local requirements.
DYNAMIC SWING SENSOR
The Dynamic SwingSensor which gently alerts the operator if the locator is being swung excessively, potentially compromising the accuracy of any locates.
PEAKHOLD
PeakHold allows operators to quickly and confidently pinpoint the exact position of buried services
DATA LOGGING
The CXL4-D and CXL4-DBG Cable Avoidance Tools have full data logging capability. A years worth of data can be stored, in normal usage, on both the Cable Avoidance Tool and the SGV4 Signal Generator.
DATA LOG TRANSFER via USB
This can be conveniently transferred at any time to supervisors for analysis via a USB cable to a PC (or wirelessly via Bluetooth from the DBG model only to a PC, tablet or smartphone).
DATA ANALYSIS
C.SCOPE PC ‘TOOLKIT’ and ‘RELAY’ Smartphone App
The free-to-download C.Scope PC Toolkit and C.Scope Relay smartphone App analyses the stored data-logs into charts and graphs that illustrate all aspects of the use allowing training requirements to be quickly identified.
GPS
The CXL4-DBG with in-built GPS allows a record to be kept of exactly where the Locators have been used that can then be viewed in partnership with Google Earth or Google Maps.
Twelve months of GPS data is stored, in normal usage. This can be conveniently transferred at any time via a USB cable to a PC or wirelessly via Bluetooth to a PC, tablet or smartphone to supervisors for analysis. The free-to-download C.Scope PC Toolkit and Relay smartphone App analyses the stored data.
Additionally, the Locators can be paired to third party GPS Survey equipment, via the Locators in-built Bluetooth facilitating ‘one pass’ underground utility surveys to be undertaken.
CALIBRATION
The CXL4 Cable Avoidance Tools do not require periodic recalibration. A fully Automatic Daily Self Test (ADST) tests and confirms that they are functioning at their optimum level each day.
AUTOMATIC DAILY SELF TEST (ADST)
The CXL4 Cable Avoidance Tools perform an Automatic Daily Self Test (ADST). The ADST checks the functionality of the locator including the receiving aerials each day when it is first switched on. The SGV4 Signal Generator also performs a comprehensive Automatic Daily Self Test (ADST).
At the start of each day of use, a positive Automatic Daily Self Test result gives confirmation to the operator that the kit is working at the optimum level.
The result of this test is recorded and stored on memory within the products in-built data files and can be downloaded onto a PC at any time within the following 12 months*.
PRODUCT VALIDATION CERTIFICATION
These test results can be used to produce a Product Validation Certificate using the C.Scope PC Toolkit. In addition, any results of the Self Test that have been carried out in the last twelve months* are available.
C.Scope authorised Service Centres are also able to provide third-party Test and Conformity Certification should you require it to comply with client or internal requirements.
HIGH RESOLUTION BACKLIT DIGITAL DISPLAY
The CXL4 has a large, clear and easy to read backlit LCD mounted behind a protective polycarbonate lens. The display indicates detection mode, signal peak level, depth, signal strength and battery condition. It also displays the Automatic Daily Self Test results.
DETACHABLE SPEAKER
The speaker can be easily detached for use in noisy work environments.
ROBUST AND DURABLE CONSTRUCTION
The CXL4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.
SERVICE
A complete covers off service & maintenance package is available for those customers who require it from C.Scope Authorised Service Centres.
THREE YEAR WARRANTY
The CXL4 comes with a three year Warranty (conditions apply).
Overview
- Power Mode
- Radio Mode
- Generator Mode:
Simultaneous 33+131kHz
33kHz signal detection for all purpose tracing and utility avoidance
+ 131kHz for optimum detection for short length, small diameter or unearthed cables - All Scan Mode
- Overload Protection
- Alarm ZoneTM
- Peak Hold
- Dynamic Swing Sensor
- Automatic Daily Self Test
- Data Logging of all Locator activity (option)
- Data Transfer by USB. (BluetoothTM option)
- In-Built GPS position logging (option)
- Connectivity to Survey level GPS products (option)
- High Resolution Backlit Liquid Crystal Display
- No periodic Calibration required
- Product Validation Certificate available
- Network Rail Approved
Specification
The CXL4 Cable Avoidance Tool is available in three model types:
- CXL4 Cable Avoidance Tool
The C.Scope CXL4 is a high performance digital simultaneous dual-frequency (33+131kHz) Cable Avoidance Tool. - CXL4-D Cable Avoidance Tool
The C.Scope CXL4-D is a high performance digital simultaneous dual-frequency (33+131kHz) Cable Avoidance Tool with in-built Data Logging. - CXL4-DBG Cable Avoidance Tool
The C.Scope CXL4-DBG is a high performance digital simultaneous dual-frequency (33+131kHz) Cable Avoidance Tool with in-built Data Logging, Bluetooth connectivity and GPS tracking.
These products are designed for use with an SGA4 or an SGV4 Signal Generator.
Product name
CXL4 Cable Avoidance Tool
Part Nos.
- CXL4
- CXL4-D
- CXL4-DBG
Controls
- On/Off Switch: Spring loaded trigger switch under handle
- Function Select Switch (FOUR position): P. Power Mode; R. Radio Mode; G. Generator Mode; A. AllScan Mode
- Sensitivity Control
Audio Indication
Removable and user replaceable loudspeaker module
Visual Indication
Multi-segment Liquid Crystal Display indicating:
- Signal Strength
- Mode selected
- AlarmZone
- Battery Condition
- Self Test Indicator
- For CXL4-DBG only, GPS signal detected, Bluetooth activated
Data Logging
Internal capacity for storing over 12 months of data (in normal use) logged once per second. Data logged includes:
- Time/Date
- Mode
- Sensitivity Level
- Received Signal Level
- Frequency
- Depth
- Self Test Result
- Swing Indicator
- GPS position (CXL4-DBG only)
Bluetooth
Bluetooth v2.1 (for Android) and v4.0 (for Apple iOS)
GPS
GPS/QZSS/GLONASS/SBAS
Data Connector
Standard USB Mini B connector in battery compartment. USB 2.0 Compatible
Self Test
Automatic Daily Self Test
Swing Indicator
Audio beep to indicate incorrect use of the Locator
Generator Mode Frequencies
Simultaneous 131.072kHz and 32.768kHz
Construction
Case moulded from high impact plastic. Designed to withstand 1m (3’3”) drop onto a hard surface
Weight (including batteries)
2.65kg (5 lb 13 oz)
Dimensions
720mm x 280mm x 65mm (28.3” x 11” x 2.5”)
Performance
- Locate Accuracy: better than 10% of depth
- Depth Accuracy: ±5% @ 1m (3’3”)
- Line Depth Measurement Range: 0.1m to 9.99m (4” to 32’)
- Line Depth Resolution: 0.01m (0.4”)
- Sonde Depth Measurement Range: 0.1m to 9.99m (4” to 32’) depending on Sonde type
- Sonde Depth Resolution: 0.01m (0.4”)
Battery Type
Internal 8 x ‘AA’ (LR6) cells (either alkaline non-rechargeable or NiMH rechargeable)
Battery Life
40 hours intermittent use at 20ºC (68ºF) using alkaline cells
IP Rating
65
Network Rail Approved
Notes
Performance figures stated can be affected by site parameters such as ground conditions, temperature, and strong electromagnetic fields. Specification may be subject to change. All C.Scope Locators are in compliance with the essential requirements and other relevant provisions of Council Directive 2014/30/EU (EMC). Compliance has been demonstrated by testing representative samples to the relevant harmonised standards. All C.Scope Locators comply with the essential requirements and other provisions of Council Directive 2011/65/EU (RoHS).
| Locator Features | CXL4 | CXL4-D | CXL4-DBG |
| Power Mode | • | • | • |
| Radio Mode | • | • | • |
| Generator / Transmitter Mode | • | • | • |
| – 33+131kHz | • | • | • |
| – 131kHz | – | – | – |
| – 33kHz | – | – | – |
| – 8Hz | – | – | – |
| – 512Hz | – | – | – |
| – 640Hz | – | – | – |
| AllScan Mode | • | • | • |
| Accurate Depth Indication | – | – | – |
| Signal Current Measurement | – | – | – |
| Overload Protection | • | • | • |
| AlarmZone |
• | • | • |
| Peak Hold | • | • | • |
| Dynamic Swing Sensor | • | • | • |
| Automatic Daily Self Test | • | • | • |
| Product Validation Certificate | • | • | • |
| Data Logging | – | • | • |
| Data Logging Rate – once per second | – | • | • |
| 2GB Memory | – | • | • |
| Data Transfer via USB | – | • | • |
| Data Transfer via Bluetooth |
– | – | • |
| External Survey Level GPS via Bluetooth |
– | – | • |
| In-Built GPS position logging | – | – | • |
| High Resolution Backlit Liquid Crystal Display | • | • | • |
| No Periodic Calibration* | • | • | • |
| Three Year Warranty** | • | • | • |
| Batteries*** 8 x AA (LR6) Alkaline or NiMH Rechargeable | • | • | • |
| IP65 | • | • | • |
| Performance | Frequency | Sensitivity @ 1m depth |
Detection Depth (max) |
| Power | 50-400Hz | 5mA | 3m |
| Radio | 10kHz-30kHz | 25µA | 2m |
| Generator | 33+131kHz | 5µA | 5m |
| AllScan | 50Hz-33kHz | 100µA | 3m |
| Sonde | 33kHz | – | 7m |
| Rodding Oscillator | 33kHz | – | 4.5m |
| Traceable Rodder – Line | 33kHz | – | 3m |
| Traceable Rodder – Tip/ Sonde | 33kHz | – | 4m |
GPS
| Acquisition Time – Cold Start | 30s |
| Acquisition Time – Hot Start | 1s |
| No. of Channels | 56 |
| Supported Systems | GPS, SBAS, QZSS, Galileo, GLONASS |
Bluetooth
| Version | v2.1 (for Android) and v4.0 (for Apple iOS) |
| Supported Systems | PC, Android and Apple iOS |
| Range | 30m |
| Transfer Rate | 350kbps |
* No Periodic Calibration. The CXL4 Cable Avoidance Tools do not require periodic recalibration. The CXL4-D and CXL4-DBG Product Validation Certificate can be printed using the PC Toolkit. C.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal regulations.
** Three Year warranty. Conditions apply.
*** Batteries. The CXL4 Cable Avoidance Tools use 8 x AA LR6 Alkaline or NiMH Rechargeable batteries sealed in a secure, fitted battery compartment. The battery pack will typically provide approximately 40 hours of service depending on use. The battery compartment also houses a spare battery holder.
The post C.SCOPE UNDER GROUND CABLE AVOIDANCE TOOL CXL4 CABLE AVOIDANCE TOOL appeared first on Adex.
]]>The CXL3 is a robust and affordable analogue industry standard ‘pick-up-and-go’ Cable Avoidance Tool used to detect pipes and cables prior to excavations. Designed for use with an SGA3 Signal Generator.