The post Ebara 1GP Domestic appeared first on Adex.
]]>• 1GP H, single self-priming pump unit with a 24-litre horizontal membrane autoclave;
• 1GP P, self-priming pump arranged for the application of membrane autoclave;
• 1GP Presscomfort, self-priming pump equipped with Presscomfort automatic control device.
For further technical information see the Databook
• Domestic pressurisation, small-scale garden irrigation
• Washing of vehicles
• Handling of clean water in general
|
Max. working pressure
|
6 bar for AGA 0.60-0.75-1.00
10 bar for the rest of the range |
|
Max. temperature of the liquid
|
45°C
|
|
MEI
|
> 0.4
|
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP44
|
|
Voltage
|
Single phase 1 ~ 230V ± 10%
|
|
Pump body
|
Cast iron
|
|
Impeller
|
PPE+PS with glass fibres for AGA 0.60-0.75-1.00,
brass for the rest of the range |
|
Shaft
|
AISI 304 stainless steel (EN.14301)
|
|
Mechanical seal
|
Ceramic/Carbon/NBR (standard)
|
|
Motor support
|
Aluminium
|
The post Ebara 1GP Domestic appeared first on Adex.
]]>The post Ebara AGA – AGC appeared first on Adex.
]]>• Domestic pressurisation
• Small-scale garden irrigation
• Washing of vehicles
• Handling of clean water in general
|
Flow rate
|
from 0.3 to 9.6 m³/h
|
|
Total head
|
From 16.5 to 68 m
|
|
Max. working pressure
|
6 bar for AGA 0.60-0.75-1.00
10 bar for the rest of the range |
|
Max. temperature of the liquid
|
45°C
|
|
Max. suction depth
|
8 m
|
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP44
|
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
|
Pump body
|
Cast iron
|
|
Impeller
|
PPE+PS with glass fibres for AGA 0.60-0.75-1.00,
brass for the rest of the range |
|
Shaft
|
Stainless steel AISI 303 (EN 1.4305) (part in contact with liquid)
|
|
Mechanical seal
|
Ceramic/Carbon/NBR (standard)
|
|
Motor support
|
Aluminium for AGA 0.60-0.75-1.00,
Cast iron for the rest of the range |
The post Ebara AGA – AGC appeared first on Adex.
]]>The post Ebara JES – JE appeared first on Adex.
]]>Self-priming centrifugal pump in AISI 304 steel with a special hydraulic system including a Venturi unit (ejector and diffuser) that can suck water up to 8 metres deep.
Suitable for residential applications: gardening and irrigation.
Lightweight and easily transportable, small in size.
For further technical information see the Databook
• Domestic pressurisation
• Pressure boosting in general
• Garden irrigation systems
• Vehicle washing
• Handling of clean water
|
Flow rate
|
From 0.3 to 4.5 m³/h
|
|
Total head
|
From 11.5 to 49 m
|
|
Max. working pressure
|
6 bar
|
|
Max. temperature of the liquid
|
45°C
|
|
Max. suction depth
|
8 m
|
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP44 (IP55 on request)
|
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
|
Pump body
|
Stainless steel AISI 304 (EN 1.4301)
|
|
Impeller
|
Stainless steel AISI 304 (EN 1.4301) for JE
PPO reinforced with glass fibres for JES |
|
Shaft
|
Stainless steel AISI 303 (EN 1.4305) (part in contact with liquid)
|
|
Mechanical seal
|
Ceramic/Carbon/NBR (standard)
|
|
Motor support
|
Stainless steel AISI 304 (EN 1.4301)
|
The post Ebara JES – JE appeared first on Adex.
]]>The post Ebara JESX – JEX appeared first on Adex.
]]>|
Flow rate
|
From 0.3 to 4.5 m³/h
|
|
Total head
|
From 11.5 to 49 m
|
|
Max. working pressure
|
6 bar
|
|
Max. temperature of the liquid
|
45°C
|
|
Max. suction depth
|
8 m
|
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP54 (IP55 on request)
|
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
|
Pump body
|
Stainless steel AISI 304 (EN 1.4301)
|
|
Impeller
|
Stainless steel AISI 304 (EN 1.4301) for JEX
PPE+PS with glass fibres for JESX |
|
Shaft
|
Stainless steel AISI 303 (EN 1.4305) (part in contact with liquid)
|
|
Mechanical seal
|
Ceramic/Carbon/NBR (standard)
|
|
Motor support
|
Aluminium
|
The post Ebara JESX – JEX appeared first on Adex.
]]>• Pressurisation of domestic systems
• Small-scale irrigation
• Handling of non-aggressive liquids for civil and industrial use
• Washing systems and vehicle washing
|
Flow rate
|
from 3 to 16.5 m³/h
|
|
Total head
|
From 6.3 to 17.3 m
|
|
Max. working pressure
|
6 bar
|
|
Max. temperature of the liquid
|
+90°C
|
|
MEI
|
> 0.4
|
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP44
|
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
|
Pump body
|
Cast iron
|
|
Impeller
|
Brass
|
|
Shaft
|
Stainless steel in AISI 303 (EN 1.4305) (part in contact with liquid)
|
|
Mechanical seal
|
Ceramic/Carbon/NBR (standard)
|
|
Motor support
|
Aluminium
|
• Washing of vegetables, meat, fish and molluscs
• Industrial end-of-cycle washing systems, washing and surface finishing of metal pieces, cans, washing of bottles, jars, glass containers, crates, and baskets, etc.
• Communal dishwashers, glasswashers, cup washers, spray booths
• Liquid handling, evacuation and transfer
|
Flow rate
|
from 6 to 66 m³/h
|
|
Total head
|
17.5 to 5.1 m
|
|
Max. working pressure
|
8 bar
|
|
Max. temperature of the liquid
|
15°C ÷ +90°C for std version
-15°C ÷ +110°C for H, HS, HW, HSW versions |
|
Poles
|
2
|
|
Max. solids passage
|
19 mm
|
|
Insulation class
|
F
|
|
Protection degree
|
IP55
|
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
|
Pump body
|
Stainless steel AISI 304 (EN 1.4301)
|
|
Impeller
|
Stainless steel AISI 304 (EN 1.4301)
|
|
Shaft
|
Stainless steel AISI 304 (EN 1.4301)
|
|
Mechanical seal
|
Standard = Ceramic/Carbon/NBR
H = Graphite/Ceramic/FPM HS = Silicon Carbide/Silicon Carbide/FPM HW = Tungsten Carbide/Tungsten Carbide/FPM HSW = Silicon Carbide/Tungsten Carbide/FPM |
|
Motor support
|
Aluminium
|
The CDA is a cast iron electric pump equipped with a twin impeller to increase performance while maintaining its small size.
For further technical information see the Databook
• Pressurisation of domestic installations
• Small-scale irrigation
• Washing systems and vehicle washing
• Handling of non-aggressive liquids for civil and industrial use
|
Max. working pressure
|
6 bar for CDA 0.75-1.00
10 bar for the rest of the range |
|
Max. temperature of the liquid
|
+40°C for CDA 0.75-1.00,
+90°C for the rest of the range |
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP44
|
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
|
Pump body
|
Cast iron
|
|
Impeller
|
in PPE+PS with glass fibres for CDA 0.75 – 1.00,
in brass for the rest of the range |
|
Shaft
|
in AISI 303 (EN 1.4305) per CDA 0.75 – 1.00 – 1.50 – 2.00 – 3.00,
in AISI 304 (EN 1.4301) per CDA 4.00 – 5.50 |
|
Mechanical seal
|
Ceramic/Carbon/NBR (standard)
|
|
Motor support
|
in aluminium for CDA 0.75 – 1.00
in cast iron for the rest of the range |
The post Ebara CDA appeared first on Adex.
]]>The post Ebara CMA-B-C appeared first on Adex.
]]>• Pressurisation of domestic installations
• Small-scale irrigation
• Washing systems and vehicle washing
• Handling of non-aggressive liquids for civil and industrial use
|
Flow rate
|
from 1.2 to 60.5 m³/h
|
|
Total head
|
From 5.2 to 57.0 m
|
|
Max. working pressure
|
6 bar for CMA 0.50-0.75-1.00
CMB 0.75-1.00-1.50-2.00-3.00 CMC, CMD 8 bar for CMA 1.50-2.00-3.00 CMB 4.00-5.50 |
|
Max. temperature of the liquid
|
+40°C for CMA 0.50-0.75-1.00
+90°C for the rest of the range |
|
MEI
|
> 0.4
|
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP44
|
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
|
Pump body
|
Cast iron
|
|
Impeller
|
in PPE+PS with glass fibres for CMA 0.50 – 0.75 – 1.00
in brass for CMA 1.50 – 2.00 – 3.00 CMB 2.00 – 3.00 – 4.00 – 5.50 in cast iron for CMB 0.75 – 1.00 – 1.50, CMC, CMD |
|
Shaft
|
in AISI 416 (EN 1.4005) (integral) for CMA 0.50
in AISI 303 (EN 1.4305) (part in contact with liquid) for CMA 0.75-1.00-1.50-2.00-3.00 CMB 0.75-1.00-1.50-2.00-3.00 CMC 0.75-1.00, CMD 1.50-2.00-3.00 in AISI 304 (EN 1.4301) (part in contact with liquid) for CMB 4.00-5.50 |
|
Mechanical seal
|
Ceramic/Carbon/NBR (standard)
|
|
Motor support
|
in aluminium for CMA 0.50-0.75-1.00
CMB 0.75-1.00 CMC 0.75-1.00 in cast iron for the rest of the range |
The post Ebara CMA-B-C appeared first on Adex.
]]>• Cooling, air conditioning and heating systems
• Chillers
• Washing systems
• Civil and industrial water supply
|
Flow rate
|
from 6 to 45 m³/h
|
|
Total head
|
From 6.2 to 25 m
|
|
Max. working pressure
|
8 bar
|
|
Max. temperature of the liquid
|
15°C ÷ +90°C for std version
-15°C ÷ +110°C for H, HS, HW, HSW versions |
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP55
|
|
Voltage
|
Three-phase 3~230/400V ±10%
|
|
Pump body
|
Stainless steel AISI 304 (EN 1.4301)
|
|
Impeller
|
Stainless steel AISI 304 (EN 1.4301)
|
|
Shaft
|
Stainless steel AISI 304 (EN 1.4301) (part in
contact with the liquid) |
|
Mechanical seal
|
Standard = Ceramic/Carbon/EPDM
H = Graphite/Ceramic/FPM HS = Silicon Carbide/Silicon Carbide/FPM HW = Tungsten Carbide/Tungsten Carbide/FPM HSW = Silicon Carbide/Tungsten Carbide/FPM |
|
Motor support
|
Aluminium
|
The post Ebara 2CDX(L) appeared first on Adex.
]]>|
Flow rate
|
from 1.2 to 12.6 m³/h
|
|
Total head
|
From 71.5 to 27 m
|
|
Max. working pressure
|
8 bar
|
|
Max. temperature of the liquid
|
-5°C ÷ +60°C for 2CDX(L) std and E versions
-5°C ÷ +110°C for H, HS, HW, HSW versions |
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP55
|
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
|
Pump body
|
Stainless steel AISI 304 (EN 1.4301) (2CDX)
Stainless steel AISI 316 (EN 1.4401) (2CDXL) |
|
Impeller
|
Stainless steel AISI 304 (EN 1.4301) (2CDX)
Stainless steel AISI 316 (EN 1.4401) (2CDXL) |
|
Shaft
|
Stainless steel AISI 304 (EN 1.4301) (2CDX)
Stainless steel AISI 316 (EN 1.4401) (2CDXL) |
|
Mechanical seal
|
Standard = Ceramic/Carbon/NBR
H = Graphite/Ceramic/FPM HS = Silicon Carbide/Silicon Carbide/FPM HW = Tungsten Carbide/Tungsten Carbide/FPM HSW = Silicon Carbide/Tungsten Carbide/FPM E = Graphite/Ceramic/EPDM |
|
Motor support
|
Aluminium (up to and including 1.5 kW), cast iron (2.2 kW and above)
|
The post Ebara 2CDX(L) appeared first on Adex.
]]>• Perfectly smooth shape
• Highly smooth running
• No welding points
These features ensure high corrosion resistance, high efficiency with performance of over 80% and low leakage.
Thanks to their small size, they can also be positioned in narrow or difficult to reach spaces.
For further technical information see the Databook
• Damp and saline environments
• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general
|
Flow rate
|
from 1.2 to 15 m³/h
|
|
Total head
|
From 37.5 to 12.5 m
|
|
Max. working pressure
|
8 bar
|
|
Max. temperature of the liquid
|
-5°C ÷ +60°C for CD 70/05-70/07-90/10 std and E versions
-5°C ÷ +90°C for the rest of the std version -5°C ÷ +110°C for H, HS, HW, HSW versions -5°C ÷ +120°C for the rest of E version |
|
MEI
|
> 0.4
|
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP55
|
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
|
Pump body
|
Stainless steel AISI 304 (EN 1.4301)
|
|
Impeller
|
Stainless steel AISI 304 (EN 1.4301)
|
|
Shaft
|
Stainless steel AISI 303 (EN 1.4305)
|
|
Mechanical seal
|
Standard = Ceramic/Carbon/NBR
H = Graphite/Ceramic/FPM HS = Silicon Carbide/Silicon Carbide/FPM HW = Tungsten Carbide/Tungsten Carbide/FPM HSW = Silicon Carbide/Tungsten Carbide/FPM E = Graphite/Ceramic/EPDM |
|
Motor support
|
Stainless steel AISI 304 (EN 1.4301)
|
The post Ebara CDX(L) appeared first on Adex.
]]>• Perfectly smooth shape
• Highly smooth running
• No welding points
These features ensure high corrosion resistance, high efficiency with performance above 80% and low losses.
The small size of CDX(L) electric pumps makes them suitable for narrow or difficult to reach spaces.
The versatility of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the Databook
• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general
|
Flow rate
|
from 1.2 to 15 m³/h
|
|
Total head
|
From 37.5 to 12.5 m
|
|
Max. working pressure
|
8 bar
|
|
Max. temperature of the liquid
|
-5°C ÷ +60°C for CDX(L) 70/05-70/07-90/10 std and E versions
-5°C ÷ +90°C for the rest of the std version -5°C ÷ +110°C for H, HS, HW, HSW versions -5°C ÷ +120°C for the rest of E version |
|
MEI
|
> 0.4
|
|
Poles
|
2
|
|
Insulation class
|
F
|
|
Protection degree
|
IP55
|
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
|
Pump body
|
Stainless steel AISI 304 (EN 1.4301) (CDX)
Stainless steel AISI 316L (EN 1.4404) (CDXL) |
|
Impeller
|
Stainless steel AISI 304 (EN 1.4301) (CDX)
Stainless steel AISI 316L (EN 1.4404) (CDXL) |
|
Shaft
|
Stainless steel AISI 303 (EN 1.4305) (CDX)
Stainless steel AISI 316L (EN 1.4404) (CDXL) |
|
Mechanical seal
|
Standard = Ceramic/Carbon/NBR
H = Graphite/Ceramic/FPM HS = Silicon Carbide/Silicon Carbide/FPM HW = Tungsten Carbide/Tungsten Carbide/FPM HSW = Silicon Carbide/Tungsten Carbide/FPM E = Graphite/Ceramic/EPDM |
|
Motor support
|
Aluminium
|
The post Ebara CDX(L) appeared first on Adex.
]]>