The post Joosha Single-Phase Inverter TIG DC/MMA Pulse Digital Programable Welding Machines appeared first on Adex.

• Digital adjustable welding parameters of Pre-Gas flow, arc-stars currents, Up Slope, Down Slope, crater fill current and Post-Gas flow improve the TIG welding performance.
• Digital display for presetting of welding parameters
• Power factor correction Technology (PFC) with a consequent total lack of harmonic disturbances in the mains and consumption optimization
• Ability of select welding modes: 2T/4T
• HF Arc starting, stable arc
• Ability of setting frequency of AC modes
• Ability of setting Arc force, Hot Start on MMA process
• Easy arc starting, stable arc, less spatter and excellent welding
• Ability of controlling the welding penetration, welding width, welding seam surface and extend the tungsten electrode life
• Foot pedal switch optional for welding current control
• Small size, light weight and easy to carry
• Service & warranty

The post Joosha Single-Phase Digital AC/DC TIG Series Inverter Welding Machines appeared first on Adex.

• Ability to adjust the welding current and voltage continuously
• Stability of welding parameters even at input voltage fluctuations
• Electronic and continuous control of inductance, to ensure precise and stable welding
• 2 stroke / 4 stroke
• High duty cycle for heavy duty condition
• Ability of welding of non-ferrous metals and alloys
• Excellent welding for even thin metals
• Excellent arc striking and possibility of soft start
• Reduce weight and dimensions due to the use of advanced inverter technology
• Wire insertion button
• Control BURN BACK in order to prevent sticking the wire to contact tip or work piece.
• Ability to presetting welding voltage with display of real current and voltage during welding
• Advanced inverter technology using best quality switching device insures high reliability
• Excellent CV characteristic in MIG/MAG and CC in MMA/TIG
• Control of welding Parameters on panel
• Weld ability with various electrodes in MMA mode
• Ability of Voltage Reduction Device in TIG Mode.
• Indicator to show overheat fault on panel
• Strong chassis and motor insure reliability during feeding of wire
• Control of wire speed by feedback and brake
• Manufactured and tested according to the International Standards
• Service & warranty

The post Joosha Three-phase Inverter MIG/MAG Welding Machines appeared first on Adex.

• Very easy arc striking, constant arc and very low electrical consumption.
• High frequency power INVERTER with latest type of IGBTS.
• Stability against welding current variations by using very long electric cables
• Selector with 2 weld procedures:
• Basic electrodes with “Arc Force” device
• TIG welding with thermal controlled(TCS)“lift” type striking to minimizing tungsten inclusions and also capability of welding on sharp edges
• Using switch knob instead of push button and extra life for input
• Ability to adjust the welding current continuously
• Equipped with digital display of preset current
• Constant current characteristic and stable arc
• Reduce weight and dimensions due to the use of advanced inverter technology
• Service & warranty

The post Joosha Inverter Single-Phase MMA Welding Machines Mini-EL 203 appeared first on Adex.

• Compact design (Built-in wire feeder)
• Ability to adjust the welding current and voltage continuously
• Electronic and continuous control of inductance, to ensure precise and stable welding
• 2 stroke / 4 stroke
• Stability of welding parameters even at input voltage fluctuations
• High duty cycle for heavy duty condition
• Constant voltage characteristic and stable arc.
• Ability of welding of non-ferrous metals and alloys
• Excellent welding for even thin metals
• Excellent arc striking and possibility of soft start
• Reduce weight and dimensions due to the use of advanced inverter technology
• Strong motor and chassis (2-Roll ,Multi arc 271C and 4-Roll ,Multi arc 351C) insures reliability during feeding of wire
• Control of wire speed by feedback and brake
• Wire insertion button
• Ability to Pre-setting welding voltage with display of real current & voltage during welding
• Advanced inverter technology using best quality materials insures high reliability
• High duty cycle in hard conditions
• Excellent CV characteristic in MIG/MAG and CC in MMA/TIG
• Control of welding Parameters on panel
• display of overheat error
• Manufactured and tested according to International Standards
• Service & warranty

The post Joosha Three-phase inverter MIG/MAG built-in wire feeder Welding Machines appeared first on Adex.

• Very easy arc striking, constant arc and very low electrical consumption.
• High frequency power INVERTER with latest type of IGBTS.
• Stability against welding current variations by using very long electric cables
• Selector with 2 weld procedures:
• Basic electrodes with “Arc Force” device
• TIG welding with thermal controlled(TCS)“lift” type striking to minimizing tungsten inclusions and also capability of welding on sharp edges
• Using switch knob instead of push button and extra life for input
• Ability to adjust the welding current continuously
• Constant current characteristic and stable arc.
• Reduce weight and dimensions due to the use of advanced inverter technology
• Service & warranty

The post Joosha Inverter Single-Phase MMA Welding Machines appeared first on Adex.

EXCELLENT FEATURES OF MACHINES

• High-frequency arc striking, excellent even from long distances.
• High performance on thin metal sheets.
• Protection of overload and automatic compensation for mains voltage fluctuations within +15% -20%
• Ability of saving information
• Metallic main structure with shock-proof front panel
• Control panel protected against accidental impact
• Very good MMA welding characteristics, & adjustable Arc Force
• Low energy consumption
• Easy-to-use

The post Joosha Inverter TIG Digital AC/DC Welding Machines appeared first on Adex.

EXCELLENT FEATURES OF MACHINE

• Equipped with microprocessor control
• With capacitor discharge technique, Contact and GAP method
• Ability of synergic setting
• Suitable for welding stainless steel, steel (copper-plated) and also for welding Aluminum and brass (conditionally, depending on requirements )
• Novel charging circuit allowing very high welding sequences during continuous application
• Precise digital display of charging voltage
• Digital display for lift time if used the related pistol
• Monitoring of all functions( charging voltage-error codes) on display panel LED to display welding functions
• Ability of operation on two input voltage rating 230VAC and 115VAC
• High capacity reserves in the case of difficult welding tasks
• No negative impairment in case of mains voltage fluctuations (-20%, +10%)
• Maximum welding rates
• Self-protecting device in case of excess temperature or excessive welding sequence
• Warranty period

The post Joosha Single Phase Capacitor Discharge Stud Welding Machines appeared first on Adex.

EXCELLENT FEATURES OF MACHINES

• Reduced electricity consumption
• Ability to work within the wide range as input voltage
• Equipped with the PWM advanced technology and using latest power IGBT, German made, according to International standards
• Protection against over current, over voltage, under voltage and over heating
• Resistant against fluctuations and undesirable functional of old and inferior generator
• The machines performance not affected on the performance of the generator and it is compatible with any type of generators (Carry -EL G type)
• Power generator adapted (Carry -EL G type)
• Protection against short circuit and surge currents
• Protection of PCB, Diode, IGBT against all kinds of external noise that is providing long-term usage of Machine
• Protecting user against electric shock according to IEC standard
• Automatic control of cooling fan as just in case of overheating switches on so prevents fan failure and excess sediment of dust inside the machine
• Less wasting the power during no load state and decreasing electricity consumption cost
• Very simple transportation on its wheels by one person or lifting by two persons due to low weight
• Possibility of TIG welding with 15A as output current
• Possibility of applying the machines in hard climate conditions due to very high Duty Cycle (at 400c)
• Continuous regulation of welding current. Adjustment can be made during welding
• A stable, spatter free arc and easily controlled molten puddle
• Ability of MMA & TIG welding with ideal quality through 2-state switch
• Digital display of preset and real current in both welding and cutting processes
• Adjusting “Arc force” through the potentiometer on front panel for applying different electrodes (cellulosic, basic, rutile, …)
• Constant welding current regardless of cable length, arc voltage, mains voltage variation
• Excellent striking capabilities
• Equipped with Anti-stick system and Hot start
• Auto detect remote control system
• Indicator for overload protection and protection against short circuit
• Equipped with lift Arc system : High durability of electrode tip ensures ARC stability and making excellent ARC ignition by the time of lift in TIG-DC Process that prevent of molten puddle pollution, as well as the protection of torch & machine when short circuit occurs at output.
• Equipped with intelligent control fan and VRD system for incrising the life of the parts.

The post Joosha Three-Phase inverter MMA welding machines appeared first on Adex.

EXCELLENT FEATURES OF MACHINES

• Compact design (Built-in wire feeder)
• Ability of using 15kg wire spool
• Ability to adjust the welding current and voltage continuously
• 2 stroke / 4 stroke
• Stability of welding parameters even at input voltage fluctuations
• High duty cycle for heavy duty condition
• Constant voltage characteristic and stable arc.
• Ability of welding of non-ferrous metals and alloys
• Excellent welding for even thin metals
• Excellent arc striking and possibility of soft start
• Reduce weight and dimensions due to the use of advanced inverter technology
• Strong metallic plate insures reliability during feeding of wire
• Control of wire speed by feedback and brake
• Wire insertion button
• Designed, manufactured and tested according to International Standards and ISIRI
• Service & warranty

The post Joosha Single Phase Inverter MIG/MAG built-in wire feeder Welding Machine appeared first on Adex.

• Digital control of all the welding parameters
• Ability of manual pulse welding (cycle) by easy pulse mode
• Soft high frequency arc striking, even from long distance
• Energy saving function to operate the power source cooling fan and the torch water cooling only when necessary
• Ability of operation in mains voltage fluctuations within +15, -20%
• Selection of TIG HF, TIG lift, MMA only by one switch
• Ability of selection 2strokes or 4strokes in welding
• Overheating protection
• Over/under voltage protection
• Overcurrent protection
• Reduced weight and size, easy to carry

The post Joosha Three-Phase Inverter TIG DC Welding Machines appeared first on Adex.