
Ebara AGA – AGC
Cast iron self-priming centrifugal pump equipped with Venturi unit (ejector and diffuser) in PPE + PS reinforced with glass fibres. Suitable for residential applications.
Features
- Practical and easy to use
- Lightweight and easily transportable
- Available with brass impeller
Cast iron self-priming centrifugal pump equipped with Venturi unit (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to its low weight.
The AGA-AGC self-priming pump installed on a flat, well secured surface allows for an installation of up to 8 metres.
Suitable for residential applications: garden irrigation, vehicle washing and clean water handling in general.
Lightweight and easily transportable, small in size.
For further technical information see the Databook
• Domestic pressurisation
• Small-scale garden irrigation
• Washing of vehicles
• Handling of clean water in general
Technical Features
Technical data
Flow rate
|
from 0.3 to 9.6 m³/h
|
Total head
|
From 16.5 to 68 m
|
Max. working pressure
|
6 bar for AGA 0.60-0.75-1.00
10 bar for the rest of the range |
Max. temperature of the liquid
|
45°C
|
Max. suction depth
|
8 m
|
Poles
|
2
|
Insulation class
|
F
|
Protection degree
|
IP44
|
Voltage
|
Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10% |
Materials
Pump body
|
Cast iron
|
Impeller
|
PPE+PS with glass fibres for AGA 0.60-0.75-1.00,
brass for the rest of the range |
Shaft
|
Stainless steel AISI 303 (EN 1.4305) (part in contact with liquid)
|
Mechanical seal
|
Ceramic/Carbon/NBR (standard)
|
Motor support
|
Aluminium for AGA 0.60-0.75-1.00,
Cast iron for the rest of the range |
Reviews
There are no reviews yet