The post SPEEDWELL EARTH BARS AND DISCONNECTING LINKS appeared first on Adex.
]]>
SPEEDWELL Earth Bars are an efficient and convenient solution for providing a common earth point to connect to the main earthing System. Integral disconnecting links are provided for isolation at the time of testing. These Earth Bars come in variety of specifications and sizes to suit different applications, the standard sizes are shown in the table with many variations.
Other sizes and variations can be made to order.
Materials: Bar – Hard Drawn Copper Bar BS: 1432 C101
Fasteners – Brass, Silicon & Phosphor Bronze, Stainless Steel.
Channel Base – Powder Coated Mild Steel
Insulators – Reinforced Polyester.
| Terminals | W | H | L (Link-0) | Cat. # | L (Link-1) | Cat. #2 | L (Link-2) | Cat. #3 |
| 4 | 90 | 48 | 300 | EB4S | 375 | EBL41S | 450 | EBL42S |
| 6 | 90 | 48 | 400 | EB6S | 475 | EBL61S | 550 | EBL62S |
| 8 | 90 | 48 | 500 | EB8S | 575 | EBL81S | 650 | EBL82S |
| 10 | 90 | 48 | 650 | EB10S | 725 | EBL101S | 800 | EBL102S |
| 12 | 90 | 48 | 750 | EB12S | 825 | EBL121S | 900 | EBL122S |
| 14 | 90 | 48 | 850 | EB14S | 925 | EBL141S | 1000 | EBL142S |
| 16 | 90 | 48 | 950 | EB16S | 1025 | EBL161S | 1100 | EBL162S |
| 18 | 90 | 48 | 1050 | EB18S | 1125 | EBL181S | 1200 | EBL182S |
| 20 | 90 | 48 | 1200 | EB20S | 1275 | EBL201S | 1350 | EBL202S |
| 22 | 90 | 48 | 1300 | EB22S | 1375 | EBL221S | 1450 | EBL222S |
| 24 | 90 | 48 | 1400 | EB24S | 1475 | EBL241S | 1550 | EBL242S |
| 26 | 90 | 48 | 1500 | EB26S | 1575 | EBL261S | 1650 | EBL262S |
| 28 | 90 | 48 | 1650 | EB28S | 1725 | EBL281S | 1800 | EBL282S |
| 30 | 90 | 48 | 1750 | EB30S | 1825 | EBL301S | 1900 | EBL302S |
The post SPEEDWELL EARTH BARS AND DISCONNECTING LINKS appeared first on Adex.
]]>The post SPEEDWELL GROUND CLAMP AND BARS appeared first on Adex.
]]>These SPEEDWELL clamps and connectors are used for clamping cables, braids and strips to pipes.
Materials: Body – Gunmetal and Bronze U Bolt – Copper Fasteners – GI and SS
| Item | Cat. # | Remarks |
| GR – Clamp | GRS | * |
| GTC – Clamp | GTCS | * |
| GH – Clamp | GHS | * |
| GU – Clamp | GUS | * |
The post SPEEDWELL GROUND CLAMP AND BARS appeared first on Adex.
]]>The post SPEEDWELL FLEXIBLE BRAID BOND appeared first on Adex.
]]>
SPEEDWELL Flexible Copper Braids are suitable for earth bonding of Fences, Gates, Doors, Etc..where flexibility is required or the bond is subject to movements.
Other materials, sizes and types of braid can be made to order.
Materials: High Conductivity Copper BS: 4109 C101
| mm2 | Center to Center Dist. of Fixing Hole, mm | Braid Dim. mm | Hole Size mm | Cat. # Bare | Cat. # Tinned |
| 35 | 150 | 25 x 3.5 | 12 | FCB150S | FCB150TS |
| 35 | 200 | 25 x 3.5 | 12 | FCB200S | FCB200TS |
| 35 | 250 | 25 x 3.5 | 12 | FCB250S | FCB250TS |
| 35 | 300 | 25 x 3.5 | 12 | FCB300S | FCB300TS |
| 35 | 400 | 25 x 3.5 | 12 | FCB400S | FCB400TS |
The post SPEEDWELL FLEXIBLE BRAID BOND appeared first on Adex.
]]>The post CRIMP CONNECTORS TYPE C appeared first on Adex.
]]>SPEEDWELL C Crimp Connectors are used to produce very robust Joints. They are ideal for use in situations where exothermic welding is not appropriate and periodic disconnection is not required. These are used for parallel or Tap Connections of Copper Cables, Hydraulic Crimping tool with special dies are required for installation.
Materials: Extruded Electrolytic Copper (Thick Wall)
| Main Conductor (A) | Tap Conductor (B) | Cat. # |
| 10 | 1.5 – 10 | CC101510S |
| 16 | 16-Apr | CC160416S |
| 25 | 10-Apr | CC250410S |
| 25 | 16 – 25 | CC251635S |
| 35 | 16-Oct | CC351016S |
| 35 | 25 – 35 | CC251635S |
| 50 | 16 – 25 | CC501625S |
| 50 | 35 – 50 | CC503570S |
| 70 | 25 – 35 | CC503570S |
| 70 | 50 – 70 | CC705095S |
| 95 | 16 – 25 | CC951625S |
| 95 | 35 – 50 | CC705095S |
| 95 | 70 – 95 | CC957012S |
| 120 | 50 – 70 | CC957012S |
| 120 | 95 – 120 | CC129515S |
| 150 | 70 -95 | CC129515S |
| 150 | 120 – 150 | CC151218S |
| 185 | 95 – 120 | CC151218S |
| 185 | 150 – 185 | CC181524S |
| 240 | 120 – 150 | CC181524S |
| 240 | 185 – 240 | CC241824S |
| 300 | 240 – 300 | CC302430S |
The post CRIMP CONNECTORS TYPE C appeared first on Adex.
]]>The post SPEEDWELL SPLIT BOLT CONNECTORS – LINE TAPS appeared first on Adex.
]]>SPEEDWELL Split Bolt Connectors are used to couple a range of Stranded or Solid circular Conductors and no specialised tool is required for installation.
Materials: Tin Plating and Copper plating on High Strength copper Alloy
Torch: Hand Tightened
| Size mm2 | H | C | B (A/F) | D (A/F) | F | Cat. # |
| 6 | 19.85 | 4 | 12.7 | 13.35 | 4.8 | SBC006S |
| 10 | 26.75 | 4.7 | 12.7 | 19 | 5.6 | SBC010S |
| 16 | 26 | 5.7 | 12.7 | 19 | 5.6 | SBC016S |
| 25 | 28 | 7.3 | 16 | 19 | 5.6 | SBC025S |
| 35 | 35 | 7.8 | 18.5 | 24 | 6.35 | SBC035S |
| 50 | 42 | 9.7 | 24.1 | 27.2 | 8.65 | SBC050S |
| 70 | 44.5 | 11.5 | 24.1 | 27.2 | 8.65 | SBC070S |
| 95 | 50 | 14.4 | 26.5 | 35.4 | 9.4 | SBC095S |
| 120 | 57.5 | 16.2 | 30 | 35.4 | 12 | SBC120S |
| 150 | 57.5 | 16.2 | 30 | 35.4 | 12 | SBC150S |
| 185 | 57.5 | 18.2 | 31.75 | 38 | 12 | SBC185S |
| 240 | 72.5 | 22 | 40 | 48.2 | 14.25 | SBC240S |
| 300 | 72.5 | 24 | 42 | 50 | 14.25 | SBC300S |
| 400 | 76.5 | 26 | 48 | 56 | 16 | SBC400S |
| 500 | 80 | 30 | 55 | 65 | 16 | SBC500S |
The post SPEEDWELL SPLIT BOLT CONNECTORS – LINE TAPS appeared first on Adex.
]]>The post SPEEDWELL STATIC EARTH RECEPTACLE appeared first on Adex.
]]>
SPEEDWELL Static Earth Receptacle are used for sating into runways and roadways to provide a static discharge point for aircraft, fuel tankers, etc…
These receptacles are used in open areas or any where a temporary earthing point may be required such as airfields or petrol stations.
These are also available with welded tails of different length.
Materials: Gunmetal
| T | Cat. # |
| – | SERS |
| 500 | SERS50S |
| 1000 | SERS100S |
| 1500 | SERS150S |
| 3000 | SERS300S |
The post SPEEDWELL STATIC EARTH RECEPTACLE appeared first on Adex.
]]>The post SPEEDWELL EARTH BONDING POINT appeared first on Adex.
]]>
SPEEDWELL Earth Bonding Points are used for providing earthing continuity and a multiple bonding point, these bonding points are available with one, two and four hole connections.
When cast into concrete they connect the re-bar to the main earthing or lightning protection system.
These are also available with variety of tail lengths to suit deferent applications the tail ends are of 70 mm2 yellow green pvc coted stranded cable which are pre welded by exothermic welding method.
Materials: Body – Gunmetal, Bolts – Al Bronze, Phosphor Bronze and SS
Torch: BS EN 50164-1:2000 (8 Nm.)
BONDING POINT WITH TAIL
| No. Of Holes | L | W | T | Cat. # |
| 1 | 80 | 49 | – | BP1S |
| 80 | 49 | 500 | BP150S | |
| 2 | 80 | 80 | – | BP2S |
| 80 | 80 | 500 | BP250S | |
| 80 | 80 | 1000 | BP2100S | |
| 80 | 80 | 1500 | BP2150S | |
| 80 | 80 | 3000 | BP2300S | |
| 4 | 80 | 64 | – | BP4S |
| 80 | 64 | 500 | BP450S | |
| 80 | 64 | 1000 | BP4100S | |
| 80 | 64 | 3000 | BP4300S |
BONDING POINT FOR TAPE
| No. Of Holes | L | W | T | Cat. # |
| 80 | 54 | – | BPTS | |
| 80 | 54 | 500 | BPT250S | |
| 2 | 80 | 54 | 1000 | BPT2100S |
| 80 | 54 | 1500 | BPT2150S | |
| 80 | 54 | 3000 | BPT2300S |
The post SPEEDWELL EARTH BONDING POINT appeared first on Adex.
]]>The post SPEEDWELL EYE BOLT appeared first on Adex.
]]>These Eye Bolts can be directly screwed onto earth rods, thereby offering a static discharge unit.
Materials: Gunmetal
| Thread Dia | Cat. # |
| 9/16″ | EYB12S |
| 5/8″ | EYB16S |
| 3/4″ | EYB20S |
The post SPEEDWELL EYE BOLT appeared first on Adex.
]]>The post SPEEDWELL B BOND appeared first on Adex.
]]>SPEEDWELL B Bonds are used for bonding tape to metal structure.
Materials: Body – Gunmetal, Bolts – Al Bronze, Phosphor Bronze and SS
Torch: BS EN 50164-1:2000 (17 Nm.)
| Tape Width mm | Bolt Size | Cat. # |
| 25 | M10 | BB25S |
The post SPEEDWELL B BOND appeared first on Adex.
]]>The post SPEEDWELL METALWORK BOND appeared first on Adex.
]]>SPEEDWELL Metalwork Bond is designed for bonding to all types of metal structures up to 13mm thickness.
Materials: Body – Gunmetal, Bolts – Al Bronze, Phosphor Bronze and SS
| Conductor Size mm2 | Channel Thickness mm | Cat. # |
| 35 – 50 | M10 | MWB01S |
The post SPEEDWELL METALWORK BOND appeared first on Adex.
]]>The post SPEEDWELL TOWER EARTH CLAMP DOUBLE PLATE appeared first on Adex.
]]>SPEEDWELL Tower Earth Clamps are designed for bonding copper conductor to metal surfaces.
Materials: Body – Gunmetal, Bolts – Al Bronze, Phosphor Bronze and SS
Torch: BS EN 50164-1:2000 (12 Nm.)
| Conductor Size mm2 | Channel Thickness mm | Bolt Size | Cat. # |
| 16 – 70 | 10 | M10 | TECD70S |
| 70 – 120 | 10 | M10 | TECD120S |
| 120 – 185 | 10 | M12 | TECD185S |
| 185 – 240 | 10 | M12 | TECD240S |
The post SPEEDWELL TOWER EARTH CLAMP DOUBLE PLATE appeared first on Adex.
]]>The post SPEEDWELL TOWER EARTH CLAMP SINGLE PLATE appeared first on Adex.
]]>SPEEDWELL Tower Earth Clamps are designed for bonding copper conductor to metal surfaces.
Materials: Body – Gunmetal, Bolts – Al Bronze, Phosphor Bronze and SS
Torch: BS EN 50164-1:2000 (12 Nm.)
| Conductor Size mm2 | Channel Thickness mm | Bolt Size | Cat. # |
| 16 – 70 | 10 | M10 | TECS70S |
| 70 – 120 | 10 | M10 | TECS120S |
| 120 – 185 | 10 | M12 | TECS185S |
| 185 – 240 | 10 | M12 | TECS240S |
The post SPEEDWELL TOWER EARTH CLAMP SINGLE PLATE appeared first on Adex.
]]>