Tsurumi GSD | 3-PHASE / 50Hz
Heavy duty sand pump – a special steel impeller and suction plate have greatly increased the pump’s life. The casing is designed to have wide passing area, thorough thickness and anti-abrasion material
- øDischarge bore : 250
- Motor output kW : 55,0
- Poles : 4
- Impeller : Vortex
- Motor protector (built-in)
- Flow arrangement : Side discharge (spiral type)
Description
Reviews (0)
Material
| ø Discharge bore mm | 250mm | |||
|---|---|---|---|---|
| Pumping Fluid | Temperature | 0-40°C | ||
| Type of Fluid | Sludge, Slurry, Liquids containing sandy mud and/or bentonite | |||
| Pump | Compo- nents | Impeller | Open type impeller | |
| Shaft Seal | Double mechanical seal | |||
| Bearings | Shielded ball bearings | |||
| Material | Impeller | Chromium iron casting | ||
| Casing | Grey iron casting EN-GJL-200 | |||
| Suction Plate | Chromium iron casting | |||
| Shaft Seal | Silicon carbide in oil bath | |||
| Motor | Motor Protector (built-in) | Miniature protector | ||
| Type, Poles | Induction motor, 4 poles, IP68 | |||
| Lubrication | Turbine oil (ISO VG32) | |||
| Phase / Voltage | 3-phase / 400V / 50Hz / s.d. | |||
| Insulation | Insulation class F | |||
| Material | Casing | Grey iron casting EN-GJL-150 | ||
| Shaft | Stainless steel EN-X30Cr13 | |||
| Cable | Rubber, NSSHÖU | |||
| Discharge Connection | Hose coupling | |||
