Tsurumi LH-W | 3-PHASE / 50Hz
The recent developments of civil engineering and architectural technologies are increasing the necessity of digging deeper into the earth. This requires a submersible pump with a rugged construction that can withstand the high pressure so deep in the water.
- øDischarge bore : 50 – 100
- Motor output kW : 3,0 – 110,0
- Poles : 2
- Impeller : Vortex
- Motor protector (built-in)
- Flow arrangement : Top discharge
Description
Reviews (0)
Material
| ø Discharge bore mm | 50, 80, 100 | |||
|---|---|---|---|---|
| Pumping Fluid | Type of Fluid | Spring water, Rain water, Ground water, Sand carrying water | ||
| Temperature | 0-40°C | |||
| Pump | Compo- nents | Impeller | Closed type impeller | |
| Shaft Seal | Double mechanical seal | |||
| Bearings | Shielded ball bearings | |||
| Material | Impeller | Chromium iron casting | ||
| Shaft Seal | Silicon carbide in oil bath | |||
| Casing | Grey iron casting EN-GJL-200, Ductile iron casting EN-GJS-450-10 | |||
| Motor | Type, Poles | Induction motor, 2 poles, IP68 | ||
| Motor Protector (built-in) | Circle thermal cut-out, Miniature protector | |||
| Insulation | Insulation class F, Insulation class B | |||
| Phase / Voltage | 3-phase / 400V / 50Hz / d.o.l., 3-phase / 400V / 50Hz / s.d. | |||
| Lubrication | Turbine oil (ISO VG32) | |||
| Material | Casing | Grey iron casting EN-GJL-200 | ||
| Shaft | Stainless steel EN-X30Cr13 | |||
| Cable | Rubber, NSSHÖU | |||
| Discharge Connection | Threaded flange, JIS 20K Flange | |||
